Panasonic NA168VG3 Operations Instructions download pdf (Page 34)

34 - Installation Instructions

Connecting Hoses and Power Supply

Water-supply hose

Caution

Do NOT connect the water-supply -

hose to a combination tap.

Do NOT twist, squash, modify, or -

cut the hose.

Optimum mains water pressure is 0.03 - -

1.0 MPa. If the water pressure exceeds

this value, install a pressure reducing

valve.

Water-flow from the tap should be more -

than 5 L/min.

Connecting the water-supply hose

Attach one end of the hose to 1.

the water inlet on the back of the

appliance and tighten the joint by

hand.

Attach the other end of the hose to 2.

the tap and tighten it the same way.

Open the tap slowly and make sure 3.

that there are no leaks around the

joints.

The joints are subject to water pressure.

Follow the instructions in this section to prevent water leaks. If you are unsure, ask a service

agent to connect the hoses.

Hoses and cable lengths

Left side connections Right side connections

~ 105 cm ~ 135 cm

~ 130 cm ~ 90 cm

~ 100 cm ~ 140 cm

0 – max. 100 cm

min. 10 mm min. 10 mm

3/4” 3/4”

Hose with water-

supply valve

Standard hose

NA-168VG3_English.indb 34 2011-3-17 15:10:10

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

No comments

Panasonic NA168VG3 Operations Instructions Page 34