
Convenient functions
VQT3C13
102
Changing the unit’s settings
¾ Automatic Standby after Copy
If “On” is selected, this unit is turned to standby
mode when it is not operated for approximately
5 minutes after completing copy (> 58, 59).
¾ RF OUT ( Aerial Signal )
Set whether to output the aerial signal or not from
RF OUT while in standby mode (when “Power
Save in Standby” is activated).
≥If “On” is selected, the aerial signal is output
from this unit.
∫ Remote Control
Change the remote control code on the main unit and
the remote control if you place other Panasonic
products close together.
≥Use “BD 1”, the factory set code, under normal
circumstances.
1 Select the code, then press [OK].
2 While pressing [OK], press and hold the number
button ([1] to [6]) for more than 5 seconds.
3 Press and hold [OK] for more than 5 seconds.
4 Press [OK].
≥Operation is possible only with Panasonic remote
controls with “IR6” printed at the bottom when the
remote control code of this unit is set to “BD 4”,
“BD 5” or “BD 6”.
∫ Clock
If the time is not set correctly, use the settings listed in
the method below.
≥Automatic
This unit usually obtains time and date information
from digital broadcasts.
But, if the time is not set correctly, set it to “Off” and
perform “Manual Setting”.
≥Manual Setting
1 Select “Off” of “Automatic”, then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the settings.
≥Time Zone
Adjust the time data automatically or from
GMT -6 to + 6.
∫ Owner ID
In order to prevent another person from using this unit
if it is stolen, you can set a PIN and input your personal
information (NAME, HOUSE NO, POSTCODE).
Once the PIN has been set, you cannot return to
the factory preset. Make sure not to forget this.
∫ PIN Entry
You can set/change the PIN. (> 91)
BLU-RAY DISC RECORDER
IR6
BLU-RAY DISC RECORDER
IR6
IR6
Clock
Time Date
Time Zone
Automatic
Please set the clock.
OK : access RETURN : leave
OK
RETURN
0
00
10
Automatic
On
11
2011
DMRBWT800&700EB-VQT3C13_eng.book 102 ページ 2011年3月24日 木曜日 午後2時44分
Comments to this Manuals