Panasonic DMR-BWT800 Operations Instructions Page 116

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 115
Reference
VQT3C13
116
Unit care
Refere
nce
This unit
Wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean
this unit.
Before using chemically treated cloth, carefully read
the instructions that came with the cloth.
This unit’s lens
Use the Lens cleaner (not supplied) to clean the
unit’s lens
Place the unit on a surface that is flat and not
subject to vibration or impact.
Do not place on anything
that generates heat like a
VCR, etc.
Place in an area where
condensation does not
occur. Conditions where
condensation may occur
When there is an extreme change in temperature
(moving from a very hot location to a very cold
location, or vice versa, or when subjected to an air
conditioner or when cooled air directly impacts the
unit).
When there is high humidity or a lot of steam in the
room.
During the rainy season.
In the above situation, without turning the unit on,
let the unit adjust to the room temperature and wait
2–3 hours until condensation is gone.
Cigarette smoke etc. causes malfunction
or breakdown
The unit may breakdown if cigarette smoke or bug
spray/vapour, etc. gets inside the unit.
Before moving the unit, ensure the disc tray is empty.
1 Turn the unit off. (Wait until “BYE” disappears from
the display.)
2 Remove the AC mains lead from the household
mains socket.
3 Move only after the unit has come to a complete
stop (approx. 3 minutes) in order to avoid
subjecting to vibration and shock. (Even after
turning the unit off, the HDD continues operating
for a short time.)
The HDD is a high precision recording instrument and
because of its long recording capability and high
speed operation it is a very special device that is
easily susceptible to damage.
As a basic rule, save important content to a disc as
backup.
The HDD is a device that is not built to
withstand vibration/shock or dust
Depending on the setup environment and handling of
the HDD some content may become damaged and
play and recording may no longer be possible.
Especially during operation, do not subject the unit to
any vibration, shock, or remove the AC mains lead
from the household mains socket. In the event of a
power failure during recording or play, the content
may be damaged.
The HDD is a temporary storage device
The HDD is not an everlasting storage device for
recorded content. Use the HDD as a temporary
storage place for one-off viewing, editing, or copying.
It is recommended to save the recorded content on a
disc or to keep the original data or CDs that they were
copied from.
Immediately save (backup) all content as
soon as you feel there may be a problem
with the HDD
If there is an irregularity within the HDD, repetitive
strange sounds or problems with picture (block noise,
etc.) may result. Using the HDD in this condition may
worsen the problem and in the worst case the HDD
may no longer be usable. As soon as you notice this
type of problem, copy all content to disc and request
service. Recorded content (data) on a HDD that has
become unusable is unrecoverable.
Indemnity concerning recorded content
Panasonic does not accept any responsibility for
damages directly or indirectly due to any type of
problems that result in loss of recording or edited
content (data), and does not guarantee any content
if recording or editing does not work properly.
Likewise, the above also applies in a case where
any type of repair is made to the unit (including any
other non-HDD related component).
Cleaning
Lens cleaner: RP-CL720AE
This lens cleaner may not be available for sale in all
countries, e.g. not available in Germany, please
consult your Panasonic dealer for advice.
Setup precautions
This unit
VCR
DO NOT
When moving the unit
HDD (Hard disk drive) handling care
DMRBWT800&700EB-VQT3C13_eng.book 116 ページ 2011年3月24日 木曜日 午後2時44分
Page view 115
1 ... 115 116 117 ... 132

Comments to this Manuals

No comments