Panasonic DMR-BWT800 Operations Instructions download pdf (Page 115)

Troubleshooting

VQT3C13

115

You cannot access this unit from DLNA

compatible equipment on the network.

¾ Check the network connection and the network

settings. (> 12, 16, 82, 83, 100)

¾ It may not be possible to connect depending on the

types of the equipment or the status of the

equipment.

When using Wireless LAN connection, video

from the DLNA Certified media server is not

played back or video frames are dropped

during playback.

¾ Use 802.11n (2.4 GHz or 5 GHz) Wireless router.

Set the encryption type to “AES” (> 100, Wireless

Settings).

Simultaneous use with a microwave, cordless

telephone etc. at 2.4 GHz may result in connection

interruptions or other problems.

¾ On the “Wireless Settings” screen (> 100), the

continuous lighting of at least 4 “Reception”

indicators is the target for a stable connection. If 3

or fewer indicators are lit or the connection is being

interrupted, change the position or angle of your

Wireless router and see if the connection state

improves. If there is no improvement, connect to a

wired network and perform the “Network Easy

Setting” (> 16) again.

To return all the settings to the factory preset

¾ Perform “Shipping Condition” or “Default Settings”.

(> 103)

To reset the rating level settings

¾ The rating level returns to the factory preset.

1 While the unit is on, press and hold [OK], the

yellow button and the blue button on the remote

control at the same time for more than

5 seconds.

–“00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote

control or [Í/I] on the main unit until “03 VL” is

displayed on the unit’s display.

3 Press [OK] on the remote control or [< OPEN/

CLOSE] on the main unit.

–“INTI” is displayed on the unit’s display.

To reset the Owner ID settings

¾ Reset the Owner ID as follows:

1 While the unit is off, press and hold [OK], the

yellow button and the blue button on the remote

control at the same time for more than

5 seconds.

–“00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote

control or [Í/I] on the main unit until “03 VL” is

displayed on the unit’s display.

3 Press and hold [STOP ∫] on the remote control

for more than 3 seconds.

–“02 OII” is displayed on the unit’s display.

4 Press [OK] on the remote control or [< OPEN/

CLOSE] on the main unit.

Network To reset this unit

DMRBWT800&700EB-VQT3C13_eng.book 115 ページ２０１１年３月２４日　木曜日　午後２時４４分

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 131 132

Comments to this Manuals

No comments

Panasonic DMR-BWT800 Operations Instructions Page 115

Comments to this Manuals

Related products and manuals for Blu-Ray players Panasonic DMR-BWT800