Panasonic KX-HGW600 User Manual Page 108
- Page / 152
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Operating Instructions
108
Note
When you access the Camera Portal page from the WAN side, PPPoE Connection
cannot be disconnected.
DNS Relay
DNS Relay function frees you from setting up the DNS server address in each device
on the LAN side, even though it is set up with static IP address. This function distributes
the DNS server address to the Network Camera and the PC on the LAN side.
Note
When the DNS server is connected to the LAN side, do not use this function.
Connection
•Always
•Automatic
• Manual
The PPPoE Connection is online as long as the KX-HGW600 is
turned on. This is the default setting. This allows you to stop the
PPPoE Connection manually on the PPPoE Connection window
( Page 115). To initiate the PPPoE Connection again, restart
the KX-HGW600.
The PPPoE Connection is online only when data is being sent to
theInternetfromeachdeviceontheLANside.Thisallowsyouto
initiate/stop the PPPoE Connection on the PPPoE Connection
window. ( Page 115)
The PPPoE Connection is online only when you click [Connect]
on the PPPoE Connection window ( Page 115). To stop the
PPPoE Connection, click [Disconnect] on the PPPoE
Connection window.
Disconnection on
Idle
If Enabled is checked, the KX-HGW600 detects when the
PPPoE Connection is idle and will automatically disconnect it
when the length of idle time exceeds the user-specified limit.
When you use this function, check Enabled andspecifythetime
(1-99 minute). When you check Always, the timer does not work.
Use The KX-HGW600 communicates with the Network Camera and
PCs on the LAN side as a substitute for the DNS server.
(The default setting is "Use".) When static IP address is assigned
to each device on the LAN side, enter the IP address of the
KX-HGW600 (192.168.0.254) in the network or TCP/IP
properties window of each device.
Do Not Use This function does not work. When static IP address is assigned
to each device on the LAN side, enter the IP address of the
specified DNS server in the network.
- Operating Instructions 1
- Introduction 2
- Trademarks 3
- Table of contents 5
- Section 1 7
- 1.1.1 Main Features 8
- 1.1.2 System Requirements 10
- 1.2 Included Accessories 11
- 1.3 Part Names 12
- 1.3.3 Indicators 13
- Section 2 15
- 2.1 Configuration Types 16
- 2.2 Internet Configuration 17
- Preparation 17
- Ethernet jack of the modem 19
- Ethernet cable 19
- (included accessory) 19
- WAN jack 19
- 1. Turn off the PC 20
- Turning on the Devices 21
- AC adaptor cord 22
- Thread the AC adaptor 22
- 2. Start up your web browser 23
- 4. Click [Setup Page] 23
- 6. Click [OK] 24
- 2. Click [DHCP Connection] 25
- 2. Click [Static Connection] 27
- 2. Click [PPPoE Connection] 29
- 1. Start up your web browser 33
- LAN1—4 jacks 34
- Ethernet hub 39
- 3. Click [Setup Page] 43
- 5. Click [OK] 44
- Section 3 53
- 3.1 Recording/Playback 54
- 3.1.1 Preparing for recording 54
- Recording 55
- /Playback 55
- 3.1.2 Recording/Playback page 56
- 3.1.3 Recording 57
- 3.1.4 Recording Setup 58
- 3.1.5 Timer Recording Setup 59
- 3. Select Enable or Disable 60
- 3.1.6 Playback 61
- 3.2 SD Memory Card 64
- 3.2.1 File Delete 64
- 3.2.2 Format 65
- 3.2.3 Status 65
- Section 4 67
- 4.1 Setup Page 68
- 4.2 Functions 70
- 4.2.1 Camera Portal 70
- 4.2.2 Recording/Playback 71
- 4.3 Configuration 72
- 4.3.1 Basic Setup 72
- 4.3.2 Camera Setup 73
- Screen Assignment 77
- Access Control 78
- 4.3.3 Wireless Setup 83
- Encryption 86
- 6. Click [Restart Now!] 88
- MAC Address Filtering 91
- 4.4 Advanced Features 93
- 4.4.1 Address Translation 93
- Port Forwarding 94
- NAT (IP unnumbered) 96
- WAN (Internet) 98
- 4.4.2 Packet Filtering 101
- 5. Click [Restart Now!] 102
- Features 103
- 4.4.3 Optional Setup 105
- 4. Click [Restart Now!] 106
- 4.5.1 Change Password 110
- 4.5 System Commands 110
- 4.5.2 Update Firmware 112
- 4.5.3 Restart 114
- 4.5.4 Factory Default Reset 114
- 4.5.5 PPPoE Connection 115
- 4.5.6 Ping 117
- 4.6 Information 118
- 4.6.1 Status 118
- 4.6.2 Usage Data 118
- 4.6.3 Packet Filtering Log 119
- 4.6.4 User Registration 120
- 4.6.5 Support 121
- 4.6.6 Help 122
- Section 5 123
- —default settings 124
- 5.2 Wall mounting 125
- 5.3 Proxy Server Setting 126
- Technical 127
- 5.5 TCP/IP Properties Setup 129
- Section 6 133
- 6.1 Default setting list 134
- Specification and 135
- Troubleshooting 135
- 6.3 Specification 138
- 6.4 Troubleshooting 140
- 6.5 FCC and Other Information 146
- When you ship the product 152
- For product service 152
Related products and manuals for Hardware Panasonic KX-HGW600
Hardware Panasonic MA24D52 User Manual
(2 pages)
(2 pages)
Hardware Panasonic AW-PB309P User Manual
(20 pages)
(20 pages)
Hardware Panasonic LNG351GKG User Manual
(3 pages)
(3 pages)
Hardware Panasonic 2SA1532G User Manual
(4 pages)
(4 pages)
Hardware Panasonic AW-PB301 User Manual
(16 pages)
(16 pages)
Hardware Panasonic 2SC2406 User Manual
(5 pages)
(5 pages)
Hardware Panasonic DM0706SY0 User Manual
(4 pages)
(4 pages)
Hardware Panasonic 2SC3312 User Manual
(3 pages)
(3 pages)
Hardware Panasonic FT-LB10NTU User Manual
(57 pages)
(57 pages)
Hardware Panasonic 2SA2021G User Manual
(4 pages)
(4 pages)
Hardware Panasonic 2SA1018 User Manual
(3 pages)
(3 pages)
Hardware Panasonic TY-FB10WPE User Manual
(64 pages)
(64 pages)
Hardware Panasonic AW-PS301 User Manual
(6 pages)
(6 pages)
Hardware Panasonic MA27P010G User Manual
(4 pages)
(4 pages)
Hardware Panasonic 2SB1679 User Manual
(2 pages)
(2 pages)
Hardware Panasonic AJ-PCD20P User Manual
(64 pages)
(64 pages)
© 2020, manymanuals.com. All rights reserved. | 0.932 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals