Panasonic KX-HGW600 User Manual download pdf (Page 99)

Operating Instructions

[For assistance, please call: 1-800-272-7033] 99

System

Features

Instructions for the data fields

Entry Check Enabled or Disabled. When you check Enabled,the

entry works as specified. When you check Disabled,the

entry does not work but will work when you check Enabled

later.

IP Address (WAN) Enter the global IP address to send or receive data to/from

the WAN side.

Protocol Select the protocol(s) to send or receive data to/from the

WAN side. TCP, UDP, TCP&UDP, ICMP, PPTP or are

available.

Forwarding Port No. Set the port number(s) to send or receive data to/from the

WAN side. Do not enter the space.

• When a single port is desired, set the port number.

• When a range of port is desired, enter the range using "-".

For example, to set the port numbers from 2000 to 3000,

enter as "2000-3000". The starting port number must be

lower in value than ending port number.

The port numbers from 60000 to 60016 are only available

for the KX-HGW600.

• When you select in the Protocol,besuretoenter" "in

this data field.

IP Address (LAN) Enter the private IP address of each device connected to the

KX-HGW600. A data from the WAN side is forwarded to the

IP address entered in this data field. In this case, set the IP

address of the corresponding Network Camera to this value.

IP Masquerade When multiple global IP addresses are assigned by the ISP,

enter one of them as the IP address for IP Masquerade

function. When it is set to blank, the IP address assigned on

the Basic Setup window or the IP address assigned by the

ISP is used.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 151 152

No comments

Panasonic KX-HGW600 User Manual Page 99