Panasonic KX-HGW600 User Manual download pdf (Page 109)

Operating Instructions

[For assistance, please call: 1-800-272-7033] 109

System

Features

MTU size

MTU (Maximum Transmission Unit) specifies the maximum size of a packet that can be

transferred in one frame over a network. Any messages larger than the MTU are divided

into smaller packets before being sent, which slows down transmission speed.

Normally, the KX-HGW600 optimizes the MTU size automatically. Change the MTU size

only when necessary.

Note

Depending on the MTU setting, the communication speed may be extremely slow.

Dynamic Routing

The KX-HGW600 can automatically adjust to physical changes in the network’s layout.

You can specify whether or not to send the RIP information from WAN (LAN) side to LAN

(WAN) side.

WAN When the RIP information is sent to the WAN (Internet) side, the

network information on the LAN may be seen by the

unauthorized users. For security, check Do Not Send.

LAN Normally check Send. When the KX-HGW600 exists on the LAN

with other routers and they are sending the RIP information,

check Do Not Send. When the KX-HGW600 exists with no other

routers and hosts your network's connection to the Internet, all

information is sent to the Internet through the KX-HGW600.

1500 Bytes

1454 Bytes

86 Bytes

1454 Bytes

86 Bytes

Local IP Network (e.g., ADSL)

MTU=1454 Bytes

It takes time to divide the

data into smaller packets.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 151 152

No comments

Panasonic KX-HGW600 User Manual Page 109