Panasonic WJ-GXE100 Installation Guide download pdf (Page 25)

Note:

•When more than one unit is displayed in [IP Setting Software] screen, click the unit with the

same MAC address as the MAC address printed on the unit that you want to configure.

v If the installation screen of the viewer software “Network Camera View 4S” is displayed, follow

the instructions of the wizard to start the installation. (The viewer software is installed from the

camera.)

 • The“Live”pagewillbedisplayed.

 • Performthe[Time&date]settingsinthe“Setup”-“Basic”pagebeforeusingtheunit.

 • Ifthesetting(NTSC/PAL)for[Videoinput]onthe[JPEG/H.264]tabofthe“Setup”-

“Image” page is changed, the camera’s settings will be reset to the default. Note that the

network settings and [Time & date] settings will not be reset.

 • Ifyoucannotinstalltheviewersoftware“NetworkCameraView4S”orifimagesarenot

displayed, click the [Install] button next to [Viewer Software] on the launcher window to

install the software.

Note:

•When no image is displayed on the “Live” page, refer to the Troubleshooting in this docu-

ment or in the Operating Instructions on the provided CD-ROM.

•Itispossibletoenhancethenetworksecuritybyencryptingtheaccesstounitsusingthe

HTTPS function. Refer to the Operating instructions on the provided CD-ROM for how to

configure the HTTPS settings.

•Clickthe[Setup]buttononthe“Live”page,theuserauthenticationwindowwillbedis-

played. Enter the default user name and password as follows, and log in.

User name: admin

Password: 12345

•Whenchangingsettingsrelatedtothenetworksettings,suchasconnectionmode,IP

address, and subnet mask, click the [Network Settings] button in [IP Setting Software]

screen as shown in step 3, then change each setting.

•Duetosecurityenhancementsin“IPSettingSoftware”,“Networksettings”oftheunittobe

configured cannot be changed when around 20 minutes have passed after turning on the

power of the unit. (When the effective period is set to “20 min” in the “Easy IP Setup

accommodate period”.)

However, settings can be changed after 20 minutes for units in the initial set mode.

•“NetworkCameraRecorderwithViewerSoftwareLite”whichsupportslivemonitoringand

recording images from multiple cameras is available. For further information, refer to our

website (http://panasonic.net/pss/security/support/info.html).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Panasonic WJ-GXE100 Installation Guide Page 25