Panasonic WV-CF300 Installation Guide download pdf (Page 18)

1 Connect the ∅3.5 mm miniature plug (mono channel) to the adjustment monitor

output jack.

Important:

• This video output is intended for confirmation of view angle, etc. during installation or repair

service, and not for recording or monitoring.

Note:

• Video cannot be output through the video output cable after connecting the adjustment

monitor.

2 Pan, tilt and azimuth adjustment

Important:

• When adjusting pan, tilt or azimuth, do not hold the lens of the camera.

1 Adjustment of panning position

Loosen the panning table lock screw and

rotate the table to determine the panning

position (adjustable range: 350°).

• The panning position can be adjusted

between +180° (clockwise) and –170°

(counter-clockwise).

• After the panning position is determined, fix

the panning table with the panning table

lock screw.

(Recommended torque: 0.39 N·m)

2 Adjustment of tilting position

Turn the tilting table to adjust the tilting

position of the camera. (adjustable range:

±90 °)

• The view angle can be adjusted as the cam-

era uses vari-focal lens.

• Tighten the tilting lock screw after

adjustment.

(Recommended torque: 0.59 N·m)

Adjustment

Original position mark

Panning table

Panning table lock

screw[LOCK]

Clockwise: +180 º

Counter-

clockwise: -170 º

Adjustable range: ±90 º

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

No comments

Panasonic WV-CF300 Installation Guide Page 18