Panasonic WV-CF300 Installation Guide download pdf (Page 9)

9

To keep on using with stable performance

Parts of this product may deteriorate and it

may shorten the lifetime of this product when

using in locations subject to high temperatures

and high humidity. (Recommended operating

temperature: +35 °C or lower)

Do not expose this product to direct heat

sources such as a heater.

Handle this product with care.

Do not drop this product, nor apply shock or

vibration to this product.

Failure to observe this may cause trouble.

Do not touch the dome cover with your

bare hands.

A dirty dome cover causes deterioration of

picture quality.

Noise on monitor

This product is equipped with a super sensitive

CCD. Therefore, noise may appear on the

monitor. This phenomenon is not trouble.

Discoloration on the CCD color filter

When continuously shooting a bright light

source such as a spotlight, the color filter of

the CCD may have deteriorated and it may

cause discoloration. Even when changing the

fixed shooting direction after continuously

shooting a spotlight for a certain period, the

discoloration may remain.

Do not aim this product at strong light

sources.

A light source such as a spot light causes a

blooming (light bleeding) or a smear (vertical

lines).

Cleaning this product body

Turn the power off when cleaning this product.

Do not use strong abrasive detergent when

cleaning this product. Otherwise, it may cause

discoloration.

Synchronous mode setting

Image synchronous mode of this camera

indicates internal synchronization (INT) only. Set

the multiplexed vertical drive (VD2) as OFF

when the camera is connected to the system

controller of the company.

Blooming

Smear Bright subject

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments