Panasonic PT-D6000ULS User Manual download pdf (Page 22)

ENGLISH - 22

Settings

ADVANCED MENU

You can improve the vertical resolution for PAL (or SECAM)

576i, NTSC 480i, 1080/50i or 1080/60i signals. Press I H to

cycle through the options.

You can perform fine adjustments for blanking if noise appears

at the ends of the screen or the image protrudes out of the

screen during image projection using a VCR and so on. Press

F G to select the edge to adjust, and I H to move the inner

edge of the blank.

Q Setting range

Input resolution adjustment achieves the best image when the

screen flickers or halo is observed around the contour, vertical

stripes or stuck pixels appear on the screen. Press F G to

select the required option to change, and I H to change the

value. The initially displayed values vary according to the

selected input signal.

TOTAL DOTS

DISPLAY DOTS

TOTAL LINES

DISPLAY LINES

When black part of the image is losing its colour or becomes

green, you can adjust to the best colour. Press I H to change

the value.

Setting range: 0 to 255

DIGITAL CINEMA REALITY

AUTO

Detects PAL (or SECAM) 576i, 1080/50i, NTSC

480i and 1080/60i input signals and change the

setting properly.

OFF Deactive

25p FIXED

Detects only PAL (or SECAM) 576i and 1080/50i

signals, and adjust the vertical resolution of the

image to 2:2 pulldown.

30p FIXED

Detects only NTSC 480i and 1080/60i signals,

and adjust the vertical resolution of the image to

2:3 pulldown.

NOTE:

• 25p FIXED or 30p FIXED setting with signals that is not 2:2

pulldown may result low quality.

BLANKING

UPPER LOWER

LEFT RIGHT

I: Moves the inner edge of the blank area to outside.

H: Moves the inner edge of the blank area to inside.

Remote control

See “Navigating through the menu” on page 15.

See “Main menu and Sub-menu” on page 12.

Models Vertical Horizontal

PT-DZ6710E/PT-DZ6700E 0 - 599 0 - 959

PT-DW6300E 0 - 399 0 - 639

PT-D6000E 0 - 383 0 - 511

INPUT RESOLUTION

NOTE:

• The vertical stripes will not appear on the all white signal

image.

• The picture may be distorted during the adjusting operation,

but this is not a fault.

• The input resolution can be adjusted only when RGB signal

input is applied with RGB1 and RGB2 IN.

• With PT-DW6300E/PT-D6000E, automatic adjustment is not

available if signals having a dot clock frequency of more than

150 MHz are supplied.

CLAMP POSITION

NOTE:

• Available with signals from RGB 1 IN/RGB 2 IN only.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Comments to this Manuals

No comments

Panasonic PT-D6000ULS User Manual Page 22

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-D6000ULS