Panasonic PT-EX12KU Operations Instructions download pdf (Page 35)

Setting up

ENGLISH - 35

Getting Started

Installation options (optional)

You can install the projector on the ceiling using the optional ceiling mount bracket (Product No.: ET-PKE16H (for

high ceilings), ET-PKE16S (for low ceilings) and ET-PKE12B (for projector)).

■

Use only ceiling mount brackets specied for this projector.

■

For details on installation of the projector with the bracket, refer to the installation manual for the ceiling mount

bracket.

Attention

■

To ensure the projector performance and security, installation of the ceiling mount bracket must be carried out

by your dealer or a qualied technician.

Adjusting adjustable feet

The adjustable feet can be extended by turning it as shown in the gure. It is retracted by turning it in the opposite

direction. This nely adjusts the height and tilt of the projected image.

When the adjustable feet are extended, the projector can be tilted to a maximum of 2.8°.

(The projection angle can be adjusted vertically.)

Attention

■

Heated air is blowing out from the air exhaust port while the lamp is on. Do not touch the air exhaust port

directly when adjusting the adjustable feet.

■

If the keystone effect occurs in the projected image, perform [Keystone] (



page 67) from the [Screen] menu.

Note

■

Do not extend the adjustable feet beyond the red line. Adjustable feet may fall off.

■

The vertical and horizontal position of the image can be adjusted using the lens shift function.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 118 119

No comments

Panasonic PT-EX12KU Operations Instructions Page 35