Panasonic PT-EX12KU Operations Instructions download pdf (Page 78)

[Setting] menu

78 - ENGLISH

Settings

[Power management]

1) Press

▲▼

to select [Power

management].

2) Press the <ENTER> button.

■

The sub menu 2 is displayed.

3) Press

▲▼

to select an item, and press

the <ENTER> button.

[Off]

Cancels power management

function.

[Ready]

Turns off the lamps and starts cooling

when the time set using [Timer] has

elapsed. While lamp is being cooled,

the standby indicator <STANDBY>,

and the power indicator <POWER>

are ashing, you cannot operate the

projector.

When lamp cooling has nished, the

power indicator <POWER> continues

ashing and the standby indicator

<STANDBY> lights up instead of

ashing, indicating that the projector

is now in the power management

mode.

From this point, if a signal is input

or operations are performed on the

projector, the lamps will turn on and

the projection will start.

[Shut down]

Turns off the lamps and starts cooling

when the time set using [Timer] has

elapsed. During lamp cooling, you

cannot operate the projector.

When lamp cooling has nished, the

power will turn off.

[Timer] Sets times from 1 - 30 minutes.

Note

■

The factory default setting is [Off].

■

The power management function cannot be used

when the freeze function (



page 47) or shutter

function (



page 47) is in use.

■

When the power management function is started,

[P-timer] is reset.

[Direct on]

This is a function for automatically switching on

the power of the projector when the power cord is

connected, without requiring operations on the power

<POWER ON> button on the remote control or the

power button on the control panel.

1) Press

▲▼

to select [Direct on].

2) Press the <ENTER> button.

3) Press

▲▼

to switch the setting.

[Off] [On]

[Off]

Enables normal operations to turn

on/off the power.

[On]

Allows power to be turned on

directly.

Note

■

Be sure to turn on/off the power using the correct

operations.

■

Pressing the power <POWER ON> button on the

remote control or the power

button on the

projector will not turn on the power until the lamp

cooling has nished and the lamps are ready to be

turned on again.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 118 119

Comments to this Manuals

No comments

Panasonic PT-EX12KU Operations Instructions Page 78

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-EX12KU