Panasonic PT-EX12KU Operations Instructions download pdf (Page 94)

Maintenance/replacement

94 - ENGLISH

Maintenance

(ii) Change the water two or three times while you rinse the air lter.

•■

Rinse it until the cloud of the water clears. If the air lter is not rinsed sufciently, odor may result.

■

Drying the air lter

Naturally dry the air lter in a well-ventilated place, avoiding dust and direct sunlight.

•■

Do not use a hair drier or other drier.

4) Attach the air lter.

■

Insert the air lter with its tabs facing down.

5) Slide the air lter cover to the original position.

■

Perform Step 1) in the reverse order.

6) Reset the lter counter.

■

Turn on the power and perform [Filter counter reset] in the [Setting] menu.

Attention

■

After washing the air lter, dry it thoroughly before attaching to the projector. Attaching wet air lter may cause

electric shock or malfunction.

Note

■

Be sure to attach the air lter properly. If you use the projector without attaching the air lter, the projector may

be damaged due to the dirt or dust.

■

If the air lter has been damaged or dirt remains even after washing it, replace it with a a new lter (Product

No.: ET-RFE12).

■

It is recommended that the air lter is replaced after two times of cleaning and reusing.

■

After washing, the capability of the air lter may decrease.

■

After washing the air lter, reset the lter counter. Otherwise, the power of the projector may be turned off for

safety.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 118 119

No comments

Panasonic PT-EX12KU Operations Instructions Page 94