Panasonic PT-TW240U Operations Instructions download pdf (Page 32)

Projecting

- ENGLISH

Basic Operation

Check the connections of the peripheral devices and connection of the power cord (

page 29) and switch on the

power (

page 31) to start the projector. Select the image and adjust the state of the image.

Selecting the input signal

Select an input signal.

Press <INPUT> button on the control panel or the <INPUT>,

<COMPUTER>, <HDMI>, <VIDEO> button on the remote

control.

The image of the signal being input in the selected terminal is

projected.

Press <INPUT> button to display the [Source] menu. Press

▲▼ to select the desired input and press ► to enter.

How to adjust the state of the image

Adjust the projection angle.1 )

Place the projector parallel to the screen, and then install it on a at surface so that the screen becomes

rectangle.

If the image is tilted lower than the screen, extend the adjustable feet to make a rectangle screen.

For details, see “Adjusting the Projector's Height” (

page 26).

Adjust the focus.2 )

Turn the focus ring to adjust the image.

Focus Ring

Note

It is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.

If keystone distortion occurs, see [V. Keystone] in the [Position] menu (

page 41).

Projecting

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 73 74

No comments

Panasonic PT-TW240U Operations Instructions Page 32