Panasonic PTAE2000E Operations Instructions download pdf (Page 24)

Basic Operation

Remote control operation

24 - ENGLISH

You can display the image brightness and

contrast level of the input signal with a

waveform. See “WAVEFORM MONITOR”

on page 32.

J Displaying the waveform

1. Press the WAVEFORM button and display the

waveform monitor.

Press the WAVEFORM button again to escape from

the waveform mode.

2. Press ENTER button until the required waveform

option is displayed.

In FULL SCAN mode, press F G I H to change

the waveform position.

In SINGLE LINE SCAN mode, press F G to select

the required line position.

J Adjustment example

Project a commercial test signal for picture

adjustment on the screen and press the

WAVEFORM button.

Q Adjusting with luminance options

1. Press the ENTER button until FULL SCAN(Y)/

SINGLE LINE SCAN(Y) is displayed.

2. Press the PIC. ADJUST to display the PICTURE

MODE of the PICTURE menu.

3. Press G several times to display the

BRIGHTNESS.

4. Adjust the BRIGHTNESS by pressing I H.

Adjust the bottom line of the waveform to 0%

(0 or 7.5 IRE).

Setting range: -32 to +32

5. Press G once to display the CONTRAST.

6. Adjust the CONTRAST by pressing I H.

Adjust the bottom line of the waveform to 100%

(100 IRE).

Setting range: -64 to +64

Adjusting the signal condition with a waveform

FULL SCAN

Monitoring the waveform of

brightness and contrast of the whole

image.

SINGLE LINE SCAN

Monitoring the waveform of

brightness and contrast in each

horizontal line of the image.

100%

50%

100%

ENTER

Optimal

dynamic range

Adjust to 100%

Adjust to 0%

Monitor position

Optimal

dynamic range

Adjust to 100%

Adjust to 0%

Monitor position

COMPUTER (except 1080)

HDMI (Expand)

Signal level

FULL SCAN(Y) SINGLE LINE SCAN(B)

FULL SCAN(R) SINGLE LINE SCAN(G)

FULL SCAN(G) SINGLE LINE SCAN(R)

FULL SCAN(B) SINGLE LINE SCAN(Y)

NOTE:

•In SINGLE LINE SCAN mode, the position of the

waveform monitor depends on the position of the

selected line.

• You can display the main menu by pressing the MENU

button and adjust the menu items.

• The called up menu items displayed position depends

on the position of the waveform monitor.

• You can activate AUTO ADJUST of the WAVEFORM

menu by pressing the DEFAULT button.

• The signal which is lower than 0% in the waveform will

be displayed as same as 0% on the projected image.

• While the waveform is displayed, the image is

displayed without the COLOUR MANAGEMENT

adjustment.

• When adjusting the KEYSTONE of the POSITION

menu while the waveform is displayed, xvYCC will be

deactivated.

FULL SCAN(Y)/SINGLE LINE SCAN(Y)

BRIGHTNESS

Adjust the bottom line of the

waveform to 0% (0 IRE or 7.5 IRE)

CONTRAST

Adjust the top line of the waveform

to 100% (100 IRE)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Comments to this Manuals

No comments

Panasonic PTAE2000E Operations Instructions Page 24

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PTAE2000E