Panasonic PTAE2000E Operations Instructions download pdf (Page 38)

Settings

POSITION menu

38 - ENGLISH

WSS (Wide Screen Signalling) detects if a PAL/

625p (576p)/625i (576i) signal is input and that signal

has an identification signal, and switch the aspect ratio

to required setting automatically. You can switch the

system off manually.

If the 4 edges of an image is partly dropped, you can use

this function to adjust and project it properly.

Setting range: 0 to +10

OVER SCAN is not available with COMPUTER

signals.

If the projector is aligned non-perpendicularly to the

screen, or if the projection screen has an angled surface,

you can vertically correct keystone.

Setting range: -32 to 32

You can adjust V - POSITION, H - POSITION, DOT

CLOCK and CLOCK PHASE automatically when

connecting via COMPUTER IN. Press ENTER to adjust

these at the same time.

WSS

OVER SCAN

Enlarge

Shrink

KEYSTONE

Image Operation

NOTE:

• You can correct the distortion ± 30 degrees from the

vertical plane. For a better quality image, installing the

projector with a minimum of distortion is recommended.

• Some distortion may be retained for the lens shift

adjustment.

• The distortion of the main menu screen is not

correctable.

• The result of the keystone correction will affect the

aspect ratio and the size of the image.

AUTO SETUP

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 57 58

No comments

Panasonic PTAE2000E Operations Instructions Page 38