Panasonic DMRES30V Operations Instructions download pdf (Page 20)

Removing Interference / Changing RF output channel

In some cases, interference (lines or patterning) or a very poor picture may appear on

the TV when the DVD Recorder is connected. If this happens, follow the steps below to

change the video playback channel (RF output channel) to remove the interference.

Press the FUNCTIONS button for more than 5 seconds. The RF

output channel number is displayed on the DVD display.

Press ENTER to finish this setting.

Press the Numeric buttons or use the Channel (CH) button to

select a channel number, which differs by 2 or 3 from the present

channel number. (For example, if the original channel number was

28, enter 31.)

(RF OFF)

...

Retune your TV until you receive the Test pattern. It may be necessary

to repeat steps above until you can see the Test pattern clearly.

If using a Scart cable please see the note below.

Press for about 5 seconds. The preset channel will be displayed on the

DVD display.

Press channel select buttons CH or 0 to invoke [- -].

Confirm with ENTER.

FUNCTIONS

Set the RF output channel of the DVD Recorder to [- -] (RF OFF) if the DVD Recorder is

connected to the TV via the 21-pin Scart cable.

FUNCTIONS

TRACKING/V-LOCK

TV screen

The picture with interference

On-Screen Display

Test pattern indication

The clear picture

DVD display

Indication when the RF output

channel is 21 (example)

Indication after changing the RF

output channel to 31 (example)

Test pattern indication

SELECT

ENTER

RETURN

RF OUTPUT CHANNEL

CH:

DVD

SELECT

ENTER

RETURN

RF OUTPUT CHANNEL

CH:

DVD

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 95 96

Comments to this Manuals

No comments

Panasonic DMRES30V Operations Instructions Page 20

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMRES30V