Panasonic DMREX99V User Manual download pdf (Page 23)

VQT2J45

Timer Recording

What is FREEVIEW+

FREEVIEW+ is the function that enables timer recordings to be controlled by the signal sent from the

broadcaster. “Guide Link”, “Series recording” (

36), and “Split Programme” are available.

“Guide Link” – If you set a timer recording from the TV Guide, the recording’s start and stop

times can be controlled by the broadcaster, e.g. delayed start.

This is indicated by “Guide Link” in the Timer Recording screen in step 2 (> below).

“Split Programme” – If a programme is separated into 2 or more parts by some other

programmes e.g. news, this unit pauses recording during the gap.

This is indicated by “Split” in the Timer Recording screen in step 2 (> below).

When setting timer from the 1st split programme, other parts of the programme will be

automatically set and indicated by the timer mark on the TV Guide, but not shown on the

timer recording list.

If you set a timer recording from the TV Guide, the recording’s start and stop times are

controlled by the signal sent from the broadcaster. If the signal is not sent correctly,

the recording may lack the beginning or the ending part of the programmes.

In order to make the timer recording work successfully, we recommend you set the

start time earlier and the end time later by some minutes, up to a maximum of 10

minutes for Guide Link to function.

e.g. When you set the timer recording for a programme that will start at 10:00 and end

at 11:00, set “9:58” and “11:05” in step 3 (> below).

[HDD] [ RAM ] [-R ] [-RW‹V›] [+ R] [+R W] [VHS]

Preparation:

≥ Turn on the television and select the appropriate video input to suit the

connections to this unit.

≥ Turn on this unit.

≥ If recording to DVD or VHS, insert a disc or video cassette that you use

for recording (> 15).

≥ [RAM] If the disc is protected, release protection (> 76).

≥ [VHS] Ensure accidental erasure tab is intact.

≥ Confirm that the clock on the unit’s display is set to the correct time.

– The GUIDE Plus+ list appears.

3, 4, 2, 1 to select the future programme,

then

“Guide Link”, “Split” and “Series” are displayed here.

– If “Selection Screen” appears, press [3, 4] to select “Single Timer Rec.”, then

press [OK]. Refer to “Series recording” (> 36) for “Series Timer Rec.”.

Confirm the programme (start

and end time) by TV magazine,

etc. and correct if necessary

using

then

– The settings are stored and the timer programme is on.

– The timer icon is displayed.

–“

” lights on the unit’s display to indicate timer recording standby has been activated.

– Repeat steps 2–3 to programme other recordings.

– Press [Í] to turn the unit off.

≥

“Guide Link” will not be displayed and will not function under the following conditions.

– Timer programmes set manually (> 32).

– Timer programmes set from the TV Guide are modified or start/stop time

changed by more than 10 minutes from original time.

(Series): Series recording (> 36) is set.

(Split): The programme is split in two or more parts by other programmes. This

unit pauses recording during the gap between the parts of the

programme.

MANUAL SKIP

STOP

PAUSE

PLAY

INPUT

SELECT

TRACKING/V-LOCK/PAGE

CHAPTER

PROG/CHECK

SKIP/INDEX REW FF

SLOW/SEARCH

PAUSE LIVE TV

RESET

VOL

DRIVE

SELECT



STATUS

EXIT

OPTION

RETURN



DELETE

Tips

≥To check programmes (> 33)

≥To cancel a timer recording

programming

1 Press [3, 4, 2, 1] to select the

programme (the timer icon is

displayed) and press [OK].

2 While “Delete” is selected, press [OK].

Press [

] to select “Yes” and press

[OK].

– The timer icon disappears.

≥To record sound using LPCM (XP mode

only):

Set the “Audio Mode for XP Recording” to

“LPCM” in the Setup menu (> 81)

Notes

≥[RAM] [-RW‹V›] [+R] [+RW] To use a new disc,

formatting is necessary. (> 28, 76)

≥The GUIDE Plus+ list is not displayed

immediately after initial tuning is done.

≥The GUIDE Plus+ system will not work if

the clock is not set correctly.

≥If “NTSC” has been selected for “TV

System” (> 82), the GUIDE Plus+ system

cannot be used.

≥“FR” recording mode is not available when

the timer programme is controlled by

“Guide Link”.

≥The receipt of the GUIDE Plus+ system

data is only possible via the aerial input of

this unit. The receipt of the TV Guide data

via externally connected satellite receivers

is not possible.

≥

If you set a timer recording that will overlap

with other timer recordings, the “Overlapped

Timer Recording” screen appears to help

you resolve the overlapping.

Follow the on-screen instructions.

≥Simultaneous recording to two or more

drives is not possible.

Selection screen

TUE 14.10.08 12:54:00

RETURN

View

Single Timer Rec

Series Timer Rec

Delete

The West Tonight

3 TV

News & Factual

TUE 14.10.08

18:00࡯18:30

Series Info

Timer

Recording

1:58 SP

DVD

30:24 SP

HDD Remain

Tue 12/10/10

12:53:00

RETURN

Start

20:30

Date

12/10 TUE

Mode

STTL

OFF

Drive

HDD

Channel

2 BBC 2

Stop

22:30

Programme Name

Press OK to store the programme.



DELETE

All Channels : BBC 2

Holiday Programme

(Guide Link)

Number

0 9

OFF

VHS

Landscape

TV Guide:

Tue 12/10/10

12:53

Tue 12th

All

Channels

TIMER REC

RETURN

Guide

Change Display Mode

Page

+24

hours

-24

hours

Prog. Type

All Types

Comments to this Manuals

No comments

Panasonic DMREX99V User Manual Page 23

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMREX99V