Panasonic DMREX99V User Manual download pdf (Page 81)

VQT2J45

Sound and Display Settings

3, 4 select “Sound” > 1 > 3, 4 select item >

Incorrect settings can cause noise to be output which can be harmful

to your ears and speakers, and audio will not be recorded properly

on media such as mini discs.

Refer to the operating instructions for connected devices to verify

whether or not they can decode each of the audio formats.

3, 4 select “Display” > 1 > 3, 4 select item >

Others

Setup

(> 78, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

Sound

Dynamic Range Compression

[DVD-V] (Dolby Digital only)

Change the dynamic range (> 104) for easier listening in low volume.

[On] [Off

]

Digital Audio Output

Change the settings when you have connected equipment through the

unit’s Digital Audio Out terminal (> 87, 88).

Press [OK] to show the following settings.

PCM Down Conversion

Select how to output audio with a sampling frequency of 96kHz.

Signals are converted to 48 kHz despite the above settings if the

signals have a sampling frequency of over 96 kHz, or the disc has

copy protection.

[On] Signals are converted to 48 kHz. (Choose when the

connected equipment cannot process signals with sampling

frequency of 96 kHz.)

[Off

] Signals are output as 96 kHz. (Choose when the connected

equipment can process signals with sampling frequency of

96 kHz.)

Dolby Digital

Choose whether to output by “Bitstream”, which processes Dolby

Digital signals on other connected equipment, or to convert the

signals to “PCM” (2ch) on the unit before output.

[Bitstream

] When connected to equipment with a built-in Dolby

Digital decoder.

[PCM] When connected to equipment without a built-in Dolby

Digital decoder.

DTS

Choose whether to output by “Bitstream”, which processes DTS

signals on other connected equipment or to convert the signals to

“PCM” (2ch) on the unit before output.

[Bitstream

] When connected to equipment with a built-in DTS

decoder.

[PCM] When connected to equipment without a built-in DTS

decoder.

MPEG

Choose whether to output by “Bitstream”, which processes MPEG

audio signals on other connected equipment or to convert the

signals to “PCM” (2ch) on the unit before output.

[Bitstream] When connected to equipment with a built-in MPEG

decoder.

[PCM

] When connected to equipment without a built-in

MPEG decoder.

Setup

Picture

Sound

Display

Connection

Tuning

Others

Disc

Dynamic Range Compression

Off

Digital Audio Output

RETURN

TAB

SELECT

VHS

Audio Mode for XP Recording

Dolby Digital

Audio Mode for XP Recording

Choose the audio type when recording or copying with XP mode.

[Dolby Digital

](> 104)

[LPCM] (> 104)

≥The picture quality of LPCM recordings may be lower than that of

normal XP mode recordings.

≥The audio recording becomes Dolby Digital even if you selected

LPCM when using a recording mode other than XP.

Display

On-Screen Messages

Choose the approximate time until the digital channel information

screen (> 50) disappears automatically.

The length of time the Control Panel (> 49) is displayed can also be

changed, but “Off” does not work.

[Off] The digital channel information is not displayed.

[3 sec.] [5 sec.

] [7 sec.] [10 sec.]

Unit’s Display

Changes the brightness of the unit’s display.

Regardless of the setting, when “Power Save in Standby” (> 84) is

activated and this unit is turned off, the unit’s display is turned off.

[Bright

][Dim]

New Channel Message

Set whether to display the confirmation message when a DVB

channel is added.

[Automatic

] When a new DVB channel is added the unit will be

informed automatically.

[Off] The Channel Messages are not shown.

Screen Saver

[On] When this unit is not operated for approximately 5 minutes

while the screen is being displayed, the screen saver is

displayed. To return to the previous screen, press [OK].

[Off]

FUNCTION MENU Display

[On] When the unit is turned on, the FUNCTION MENU will be

displayed. (> 47)

[Off

]

Setup

Picture

Sound

Display

Connection

Tuning

Others

RETURN

SELECT

TAB

Disc

Unit’s Display

On-Screen Messages

5 sec.

Bright

New Channel Message

Automatic

Screen Saver

FUNCTION MENU Display

Off

VHS

DMR-EX99VEB_VQT2J45.book 81 ページ２０１０年１月７日　木曜日　午後１時４１分

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 107 108

Comments to this Manuals

No comments

Panasonic DMREX99V User Manual Page 81

Comments to this Manuals

Related products and manuals for DVD players Panasonic DMREX99V