Panasonic SCRT30 User Manual download pdf (Page 14)

RQT8728

Timer recording

Refer to the control reference on page 12.

Even when the unit is in standby mode, you can display the timer recording list by pressing [PROG/CHECK].

Press [PROG/CHECK].

∫ To change a programme

Press [3, 4] to select the programme and press [ENTER]. (➡ 13, Manually programming timer recordings, step 3)

∫ To delete a programme

Press [3, 4] to select the programme and press [¢].

∫ To exit the timer recording list

Press [PROG/CHECK].

Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.

VPS (Video Programme System) or PDC (Programme Delivery Control) is a very convenient system which records exactly from beginning to end

of the TV programmes set in timer recording, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension

of the programme duration. Also, if a programme is interrupted, for example, some special news is inserted, the recording will be paused

automatically and resumed when the programme continues.

[Note]

≥The beginnings of recordings may not be recorded correctly in some cases.

≥Depending on the signals sent from the TV stations, the VPS/PDC system may not work properly even when “VPS/PDC” has been set to “ON”.

≥Please check with the broadcasters in your area for details.

≥VPS/PDC does not activate while this unit is on. The system stays inactive under the condition even its setting is “ON”. In such cases, recording

starts and finishes at times you set initially.

Check, change or delete a programme

VPS/PDC function

When VPS/PDC recording ≥Use VPS/PDC time for recording the TV programmes.

≥Set “VPS/PDC” to “OFF” when recording time is not VPS/PDC time.

≥VPS/PDC recording is not performed when VPS/PDC time is incorrect, even if only by one

minute. To find out VPS/PDC time, consult Teletext, a newspaper or magazine, or other source.

–If a programme listed in a newspaper or magazine has two S

HOWVIEW numbers, use the

HOWVIEW number for VPS/PDC if you wish to proceed with VPS/PDC recording using

HOWVIEW programming.

–The default settings for “VPS/PDC” is “OFF”.

When the VPS/PDC signal drops out

because the broadcast signal is weak.

When a TV station does not transmit a

regular VPS/PDC signal.

Timer recording will be performed in the normal mode (without VPS/PDC) even if it was

programmed for VPS/PDC.

In this case, even if the timer recording is performed, whatever has been programmed will not be

cancelled at that particular time but at 4 a.m. two days later.

If the start times of scheduled

programmes listed in the newspaper or

magazine change at a later date.

Set “VPS/PDC” to “OFF” when programming a programme whose start time has been

subsequently changed.

Timer

Recording

RETURN

ENTER

Press ENTER to store new programme.

Mode

StopStartNo. Date

VPS

PDC

Name

Drive

space

20:0019:00ARD

15. 7. TUE

OFF

New Timer Programme

1:58 SP

Remain

12:53:00 15. 7. TUE

Icons

F Timer recording standby is activated.

[ This programme is currently recording.

W The times overlap those in another

programme. Recording of the programme

with the later start time starts when the

earlier programme finishes recording.

You stopped a weekly or daily timer

recording. The icon disappears the next

time the timer programme starts

recording.

F The disc was full so the programme failed

to record.

The material was copy-protected so it was

not recorded.

X The programme did not complete

recording because the disc is dirty or

some other reason.

Message displayed in the “Drive

space” line

OK: Displayed if the recording can fit in

the remaining space.

> (Date): For recordings made daily or

weekly, the display will show until

when recordings can be made (up

to a maximum of one month from

the present time) based on the

time remaining on the disc.

! : It may not be possible to record

because:

≥the disc is write-protected.

≥there is no more space left.

≥the number of possible titles has

reached its maximum.

RT70-30_EP.book Page 14 Monday, April 17, 2006 10:20 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 51 52

Comments to this Manuals

No comments

Panasonic SCRT30 User Manual Page 14

Comments to this Manuals

Related products and manuals for DVD players Panasonic SCRT30