Panasonic KX-FP151 User Manual download pdf (Page 55)

55

Remote Operation (KX-FP155 only)

■

Monitoring the room (Australian users only)

Press 6 to monitor the sound for about 30

seconds in the room where the unit is installed.

●

After 30 seconds, a beep sounds. To continue

monitoring, press 6 again within 10 seconds.

Other remote operations

Press 83 to turn ON the pager call.

■

Turning the pager call on or off

You must program a pager number beforehand

(feature #70 on page 70).

Press 84 to turn OFF the pager call.

●

If a pager number is not programmed, you

cannot turn this feature ON.

■

Changing the receive mode

Press 80 to change the receive mode from

TAD/FAX to TEL.

●

You cannot return to TAD/FAX mode in the same

call. To return to TAD/FAX mode, see below.

Pager call is set.

Pager number is 098765432.

Pager call is off.

Pager number is not set.

Press 81 to turn ON the message transfer.

■

Turning the message transfer on or off

You must pre-program a transfer telephone

number beforehand (feature #60 on page 69).

Press 82 to turn OFF the message transfer.

●

If a transfer telephone number is not

programmed, you cannot turn this feature ON.

Message transfer is set.

Transfer phone number is 123···.

Message transfer is off.

Transfer phone number is not set.

■

Skipping the greeting message

Press 0 during the greeting message playback.

●

The unit will skip the rest of the greeting

message.

■

Erasing a specific message

Press *4 while listening to the message you

want to erase.

●

A long beep will sound. The unit will then play

back the next message.

■

Erasing all the messages

Press *5 to erase all the messages.

●

A long beep will sound.

Voice guide example:

1. Wait for the voice guide.

2. Wait about 10 seconds.

3. Leave a message after the beep.

■

Recording a marker message

You can leave an additional message.

The message has been erased.

All messages have been erased.

All messages have been played

.

Please leave your name and

message after the beep.

■

Re-recording a greeting message

You can change the contents of the greeting

messages for TAD/FAX mode.

1. Press 7 to start recording.

●

A long beep will sound.

2. Speak clearly up to 16 seconds.

●

If you pause for over 2 seconds, 6 beeps

will sound and the recording will stop.

Repeat from step 1 within 10 seconds.

3. When finished recording, press 9.

●

The new greeting message will be played.

■

Returning to TAD/FAX mode

1. Call your unit and wait for 10 rings.

●

The answering device will temporarily answer

the call.

2. Enter the remote operation ID during the

greeting message.

●

Your unit will switch to TAD/FAX mode.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 87 88

Comments to this Manuals

No comments