Panasonic SCBT200 Operations Instructions download pdf (Page 33)

RQT9510

Network settings

These settings are used if you will connect this unit to the Internet.

≥The connection to the Internet may take time or the Internet may not be connected depending on the connection environment.

(> 40)

It is required that you use a broadband connection.

Preparation

≥Connect to a broadband network. (> 13)

Testing of “IP Address / DNS Settings”

Always test the connection when a LAN cable is connected.

1 While stopped

Press [BD/SD] to select “BD/DVD”.

2 Press [SETUP].

3 Press [3, 4] to select “Network Settings” and

press [OK].

4 Press [3, 4] to select “IP Address / DNS

Settings” and press [OK].

5 Press [3, 4] to select “Connection Test” and

press [OK].

“Testing...”:The test is in progress.

“Pass”: The connection is completed.

Press [RETURN] to exit.

“Fail”: Please check the connection and settings.

≥Perform the “Connection Test” also when any

change was made to the “IP Address / DNS

Settings”.

≥If the connection test fails, it may be necessary to set the

MAC address of this unit at the router side. The MAC

address can be displayed by pressing [SETUP] and

selecting “Network Settings”.

RUT

IP Address/ DNS Settings

Connection Test

OnOn

IP Address Auto-Assignment

DNS-IP Auto-Assignment

IP Address

Subnet Mask

Gateway Address

Primary DNS

Secondary DNS

Connection Speed Auto-Config

Connection Speed Setting

NOTE

RETURN

Network Settings

IP Address / DNS Settings

Proxy Server Settings

MAC Address: xx-xx-xx-xx-xx-xx

Network Service

Setting the IP address

In most cases, default settings can normally be used

without making any changes.

Set the IP address only when the router has no DHCP

server functions or when the router’s DHCP server

function is disabled.

After performing steps 1–4 (D left)

5 Press [3, 4] to select “IP Address

Auto-Assignment” and press [2, 1] to select

“Off”.

6 Press [3, 4] to select “IP Address”, “Subnet

Mask” or “Gateway Address” and press [OK].

7 Enter numbers with the numbered buttons and

press [OK].

≥After checking the specifications for your broadband

router, enter each number.

If the number is unknown, then check the number of

other devices such as personal computers connected

via a LAN cable. Assign a different number from those

of other devices for the “IP Address” and the same

number for others.

≥If a wrong number is entered, then press [CANCEL].

8 Press [2, 1] to select “Yes” and press [OK].

≥The numeric input range is between 0 and 255.

Setting the DNS-IP

In most cases, default settings can normally be used

without making any changes.

When setting an assigned DNS server from your Internet

service provider, perform the following settings.

After performing steps 1–4 (D left)

5 Press [3, 4] to select “DNS-IP

Auto-Assignment” and press [2, 1] to select

“Off”.

6 Press [3, 4] to select “Primary DNS” or

“Secondary DNS”and press [OK].

7 Enter numbers with the numbered buttons and

press [OK].

≥Follow the instructions given by your Internet service

provider and enter the numbers.

If the number is unknown, then check the number of

other devices such as personal computers connected

via a LAN cable and assign the same number.

≥If a wrong number is entered, then press [CANCEL].

8 Press [2, 1] to select “Yes” and press [OK].

≥The numeric input range is between 0 and 255.

NOTE

192

Primary DNS

Please input Primary DNS and press

[OK]. Press [CANCEL] to delete the selected

character. To clear this setting, delete all

characters and press [OK].

Number

NOTE

Advanced operations

SCBT200&205EB_RQT9510-B.book 33 ページ２００９年５月２１日　木曜日　午後５時２２分

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Comments to this Manuals

No comments

Panasonic SCBT200 Operations Instructions Page 33

Comments to this Manuals

Related products and manuals for Home cinema systems Panasonic SCBT200