Panasonic WJ-GXE100 Installation Guide download pdf (Page 26)

When using DC power supply

•Is12VDCpowersupplyconnectedto

the power supply terminal?

→ Check whether the connection is

appropriately established.

•IstheACadaptorinusecompliantwith

the Specifications?

→ Check the Specifications regarding

AC adaptor.

When using a PoE device for power

supply

•ArethePoEdeviceandthenetwork

connector on the unit connected using a

4-pair LAN cable?

→ Check whether the connection is

appropriately established.

•DependingonthePoEdevice,the

power supply will stop when the

demanded power exceeds its total

power limit for all PoE ports.

→ Refer to the operating instructions of

the PoE device in use.

•Isthepowerofthecameraconnectedto

this product turned on?

→ Turn on the power of the camera.

• 

Is the BNC coaxial cable correctly connect-

ed to the video input connector of the unit?

→ Check that the video input connector

is correctly connected.

•Doesthevideoinput(NTSC/PAL)setting

of the camera connected to this unit

match the video input setting on the

[JPEG/H.264] tab of “Image” page?

→ Set the video input to NTSC or PAL

according to the camera in use.

(☞ Operating Instructions (included in

the CD-ROM))

21, 22

–

Cause/solution

Troubleshooting

Before asking for repairs, check the symptoms with the following table.

Contact your dealer if a problem cannot be solved even after checking and trying the solution in the

table or a problem is not described below.

Power is not turned on.

Images are not

displayed correctly.

Reference

pages

Symptom

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Panasonic WJ-GXE100 Installation Guide Page 26

Comments to this Manuals

Related products and manuals for Security cameras Panasonic WJ-GXE100