Panasonic MC-V7305 User Manual download pdf (Page 15)

DEDI Ar'IMr'TUEBEIT

1 iitZi CSCLmI

WARNING

Personal Injury Hazard.

Be careful when removing agistor. The belt tenaion is high. Faiiure to do so couid

result In personal injury from agitator releasing quickly and snapping away.

Unplug and turn the unit over. Remove the lower plate as described in the REMOVING/

INSTALLING THE LOWER PLATE section.

Remove the agitator, carefully lift it out, and remove the

worn or broken belt from the brush pulley and motor shaft.

NOTE:

The two brush supports may come off along with

the two washers as you lift the agitator out.

DO NOT

lose

the two small washers.

Loop the new belt around the motor shaft and loop it

around the brush pulley. See illustration for correct belt

routing.

Use only a Panasonic Type UB8 drive belt.

Before reinserting the agitator make sure the brush sup-

ports/washers are on correctly. See illustration in

the REPLACING THE AGITATOR section.

After checking the brush supports, reinstall the agitator back into the housing grooves. After

installing the agitator, turn it by hand making sure that the belt is not twisted or pinched and all

rotating parts turn freely. Replace the lower plate as described in the REMOVING/INSTALLING

THE LOWER PLATE section.

LEANING THE AGITA

Switch off the vacuum cleaner and unplug the power

cord before cleaning the agitator. In order to keep the

cleaning efficiency high, clean the agitator regularly.

Remove the lower plate if necessary. See the REMOV

ING/! NSTALLING THE LOWER PLATE section

for the proper procedure.

Agitator - Cut off any carpet pile and lint

entangled around the agitator with a pair of

scissor as illustrated.

- 15-

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

No comments

Panasonic MC-V7305 User Manual Page 15