Panasonic WJ-HD100 User Manual download pdf (Page 23)

● Reset Pulse Polarity

106 RESET PULSE

The polarity of the alarm reset pulse is selected in the

SYSTEM SETUP window.

The reset pulse is supplied from an external device with

high or low active signal form to the RESET IN terminal

on the rear panel.

1. Open the system setup window, then move the cursor

to RESET PULSE with the up [▲] or down [▼] button.

2. Select either HIGH or LOW with the JogDial. The default

is HIGH.

HIGH: Stands for high-active. The recorder stops alarm

recording when a positive pulse is supplied.

LOW: Stands for low-active.

● Time Adjusting

107 TIME ADJUSTING

IN and OUT terminals for a calibration signal are provided

on the TIME ADJUST terminal board on the rear panel. The

master unit supplies the calibration signal to the slaves.

This is convenient for synchronizing the internal clock with

other connected devices. Make certain to connect the IN

and OUT terminals correctly.

1. Move the cursor to TIME ADJUSTING with the [▲] or

[▼] button.

2. Select either MASTER or SLAVE with the JogDial. The

default is SLAVE.

MASTER: The unit supplies the calibration OUT signal

to the slave units.

SLAVE: The internal timer of the unit is supplied the cali-

bration signal from the master.

1. Move the cursor to AUTO ERASING with the [▲] or [▼]

button.

2. Select the desired day number with the JogDial.

OFF: Auto erasing is not applied.

1DAY: Only today’s records of 0:00 onward are protect-

ed. Records before 24:00 of yesterday are erased.

2 to 10DAYS: Records before the specified number of

days are erased.

14, 30, 45, 60, 90, 120, 150, 180DAYS: Same as

above.

Notes:

• The day number includes today as 1 day, therefore

2DAYS counts today and yesterday in number.

• Auto Erasing is implemented at 24:00 mid night.

Playing back will stop once when the time comes to

24:00, then will restart with different portion based

on the renewed day count.

SYSTEM SETUP

FWD/REW MODE SKIP&PLAY

PASSWORD LOCK OFF

ALL

→

*****

OPERATION

→

*****

KEYLOCK BUZZER OFF

RESET PULSE HIGH

TIME ADJUSTING SLAVE

SET TIME

→

9:00

AUTO ERASING OFF

● Set Time

108 SET TIME

This setting specifies the hour for the master unit to supply

the Time Adjust OUT signal to the slave units once a day.

You need not set the hour when SLAVE is selected. The

slave unit accepts the signal through the IN terminal, and

corrects its internal clock to the hour as far as the clock

deviates within 15 minutes after or before the hour.

1. Move the cursor to SET TIME with the [▲] or [▼] button.

2. Select the desired time (00:00 to 23:00) with the

JogDial.

3. Press the JogDial.

● Auto Erasing

109 AUTO ERASING

The redundant records on the disk can be erased every

day at 24:00 mid night. Day numbers specified by this set-

ting means that the records stored during the number of

days from the present will be protected, while the older

records than that of the protected day will be erased.

SYSTEM SETUP

FWD/REW MODE SKIP&PLAY

PASSWORD LOCK OFF

ALL

→

*****

OPERATION

→

*****

KEYLOCK BUZZER OFF

RESET PULSE HIGH

TIME ADJUSTING SLAVE

SET TIME

→

9:00

AUTO ERASING OFF

SYSTEM SETUP

FWD/REW MODE SKIP&PLAY

PASSWORD LOCK OFF

ALL

→

*****

OPERATION

→

*****

KEYLOCK BUZZER OFF

RESET PULSE HIGH

TIME ADJUSTING SLAVE

SET TIME

→

9:00

AUTO ERASING OFF

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Comments to this Manuals

No comments

Panasonic WJ-HD100 User Manual Page 23

Comments to this Manuals

Related products and manuals for Acoustics Panasonic WJ-HD100