Panasonic HCX1000E User Manual download pdf (Page 120)

- 120 -

To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.

∫ About the connection status icon when connected to Wi-Fi

Using the Network Easy Setup to set up a connection

With the smartphone application “Image App”, you can transfer the following information between

the smartphone and this unit by using the NFC or QR code function.

≥ Install the smartphone application “Image App” on your smartphone.

≥ Register [Wi-Fi] to a USER button. (l 61)

≥ Set the NFC function of the smartphone to ON.

1 Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi

function.

2 Select the menu.

≥ Touch [YES].

3 Start up the smartphone application “Image App”.

4 Touch the smartphone on of this unit.

≥ Touch the NFC mark while a message asking you to touch the NFC mark on the device is

displayed on the smartphone screen.

≥ If this is the first time the smartphone is connecting to this unit, touch [YES] on the screen of this

unit, and then touch the smartphone on of this unit again.

≥ When the connection is complete, the setup screen is displayed on the smartphone.

Wi-Fi

Setting Up a Wi-Fi Connection

A The connection status icon

When connected to wireless access point:

connected to Wi-Fi/ not connected to Wi-Fi

≥ The display will change as follows according to the

radio wave intensity: (Weak) # # #

(Strong).

When directly connected:

connected to Wi-Fi/ not connected to Wi-Fi

With Network Easy Setup, you can set the following information:

≥ Clock information (synchronising the clock information with that of the smartphone)

≥ Information on wireless access points (SSIDs and Passwords)

If the device is Android (NFC-compatible)

: [Wi-Fi Setup] # [Wi-Fi Easy Setup]



1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 179 180

No comments

Panasonic HCX1000E User Manual Page 120