- 132 -
Refer to page 28 for how to set up the Menu.
Camera Setup
Settings that are assigned to [SCENE1] in [CUSTOMISE SCENE] by default are indicated with
underlined text.
≥ Switch to Manual Mode. (l 34)
Preferred camera setting information can be saved to each scene file. Switch the scene file in
accordance with the recording conditions.
1 Touch [CUSTOMISE SCENE].
2 Touch the scene file.
≥ The scene file will switch by touching [SCENE1] to [SCENE6].
≥ Touch [EXIT] to exit the menu screen.
3 (To change the setting of the scene file)
Change the setting of the camera setting menu.
≥ Following settings for camera setting menu can be stored. (l 133 to 136)
j [DETAIL LEVEL]
j [V DETAIL LEVEL]
j [DETAIL CORING]
j [CHROMA LEVEL]
j [CHROMA PHASE]
j [COLOUR TEMP A ch]
j [COLOUR TEMP B ch]
j [MASTER PED]
j [AUTO IRIS LEVEL]
j [DRS]
j [DRS EFFECT]
j [GAMMA]
j [KNEE]
j [MATRIX]
j [SKIN TONE DTL]
≥ Changed settings of the camera setting menu are saved in the scene file.
Default setting of the scene file
Menu
Using the Menu
: [CAMERA SETUP] # desired setting
[CUSTOMISE SCENE]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]/[SCENE6]
MENU
[SCENE1] Setting appropriate for standard recording
[SCENE2] Setting appropriate for recording considering the characteristic of fluorescent
lamps (indoors, etc.)
[SCENE3] Setting appropriate for recording with modulation in resolution, colour shade,
and contrast
[SCENE4] Setting appropriate for recording with wider gradation in dark area (dusk, etc.)
[SCENE5] Setting appropriate for recording as a cinema with high contrast
[SCENE6] Setting appropriate for recording as a cinema with high dynamic range
Comments to this Manuals