Panasonic WVCS600_SERIES User Manual download pdf (Page 10)

- 7 -

● AUTO MODE

AUTO MODE is for setting the movement of the camera. You can select from three automatic operation modes

and one manual operation mode as follows:

OFF mode: No automatic operation. The camera can be operated only manually.

SEQ mode: The camera operates in the sequence of preset positions in numerical order.

SORT mode: The camera operates in the sequence of preset positions counterclockwise from Pan/Tilt Starting

Point.

AUTO PAN mode: The camera automatically turns within the preset panning range.

See page 17 for the setting.

● LOCAL/REMOTE

LOCAL/REMOTE determines the relationship between camera operation and ON/OFF status of the controller.

You can select one of the following two modes:

LOCAL: The camera continues operating in auto mode when the controller is turned OFF.

REMOTE: The camera stops operating in auto mode approx. 1 minute after the controller is turned off.

See page 18 for the setting.

● Camera

(1) Camera Identification (CAMERA ID)

You can use the camera identification (CAMERA ID) to assign a name to the camera. The camera ID

consists of up to 16 alphanumeric characters. You can select whether to have the camera ID displayed on

the monitor screen or not.

Note:

See page 19 for the setting.

(2) Light Control (ALC/MANUAL)

You can select the mode for adjusting the lens iris.

The modes are as follows:

ALC: The lens iris is automatically adjusted according to the brightness of the object.

MANUAL: The lens iris is fixed at the value you have set regardless of the brightness of the object.

• Back Light Compensation (BACK LIGHT COMP)

Back light compensation is available in ALC mode. It eliminates interference by strong background lighting

which makes the camera picture dark, such as a spotlight. You can select one of two modes (PRESET ON

or PRESET OFF) for back light compensation.

This function is disabled in MANUAL mode.

• Factory Setup Mode (PRESET ON)

In normal use the important object in a scene is placed in the centre of the monitor's screen. In the factory

setup mode, more photometric weight is given to the centre of the screen (where the important object is

located) than to the edge of the picture (where a bright back light would most likely be located). In this

mode, even though the back light may vary, the object at the centre of the screen can still be clearly seen.

Note:

See page 20 for the setting.

• Field Setup Mode (PRESET OFF)

This mode is effective when the main object in the scene is not located in the centre of the screen and a

source of bright light is located near the centre of the screen. In this mode, the picture is divided into 48

areas. If there is a source of brightness that interferes with the clarity of the picture in these masks,

corresponding areas mask the light to keep the clarity of the picture.

Generally, when a light from the background is too strong such as a spotlight, all objects except the main

object in the picture are displayed darker because the lens iris is adjusted with respect to strong

brightness. This model ignores strong brightness by masking the source of the strong brightness, thereby

all objects are displayed clearly.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Comments to this Manuals

No comments

Panasonic WVCS600_SERIES User Manual Page 10

Comments to this Manuals

Related products and manuals for Camera accessories Panasonic WVCS600_SERIES