Panasonic WVCS600_SERIES User Manual download pdf (Page 23)

- 20 -

3. Light Control Setting (ALC/MANUAL)

• Display SET UP on the monitor screen.

If necessary, refer to Setup Menu Display for details on displaying the

SET UP on the monitor screen.

• Move the cursor to ALC/MANUAL and select ALC or MANUAL by

using the joystick. When you select ALC, set back light compen-

sation.

Note:

The back light compensation submenu associated with this menu

is described separately and should be set up after installing the

camera at the site and observing the actual site picture.

** SET UP **

CAMERA ID OFF *

ALC/MANUAL ALC *

SHUTTER OFF

AGC ON

SENS UP OFF

SYNC INT

WHITE BAL ATW *

WIDE D-RANGE OFF

MOTION DET OFF

AF MODE MANUAL*

RET SPECIAL *

Camera setting menu

* ALC CONT *

BACK LIGHT COMP

PRESET ON

RET END

* ALC CONT *

BACK LIGHT COMP

PRESET OFF

MASK SET *

LEVEL ....I....

− +

RET

Back light compensation menu

(1) ALC with Factory Setup Mode (PRESET ON)

• Select ALC and press the CAM (SET) key to display the back light

compensation menu.

• Move the cursor to PRESET and select ON by using the joystick. The

back light compensation is automatically set.

• Move the cursor to RET by using the joystick and press the CAM

(SET) key to return to SET UP.

Blinking

Turns to white

(2) ALC with Field Setup Mode (PRESET OFF)

• Select ALC and press the CAM (SET) key to display the back light

compensation menu.

• Move the cursor to PRESET and select OFF by using the joystick.

The field setup menu appears on the monitor screen as shown in the

illustration.

• Move the cursor to MASK SET and press the CAM (SET) key.

The 48 mask areas appear on the monitor screen. The cursor is

blinking in the top left corner of the screen.

• Press the CAM (SET) key to mask this area. The mask and the cursor

start blinking alternately.

• Move the cursor to the desired area by using the joystick to mask the

next area and press the CAM (SET) key to mask that area. The mask

turns white.

• When the cursor is moved on an area that has already been masked,

the mask and cursor start blinking.

• Press the CAM (SET) key if you want to cancel masking of this area.

• Press the F2 button of the WV-CU550A if you want to cancel masking

of all areas. (For the WV-RM70, press Left switch and Right switch

simultaneously.)

After masking is completed, press the MON (ESC) key. The 48 mask

areas on the monitor screen disappear and the field setup menu

appears.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Comments to this Manuals

No comments

Panasonic WVCS600_SERIES User Manual Page 23

Comments to this Manuals

Related products and manuals for Camera accessories Panasonic WVCS600_SERIES