Panasonic WVCS600_SERIES User Manual download pdf (Page 29)

- 26 -

10. Motion Detector Setting (MOTION DET)

• Display SET UP on the monitor screen.

(Refer to Setup Menu Display for details on displaying the SET UP

menu on the monitor screen.)

• Move the cursor to MOTION DET and select ON or OFF by using the

joystick.

• When you select ON, press the CAM (SET) key to display the motion

detect setup menu.

You can mask the areas in this menu.

• Move the cursor to MASK SET and press the CAM (SET) key.

48 mask areas appear on the monitor screen.

Refer to the Light Control Setting section on page 20 for details about

masking areas.

• After masking areas, press the MON (ESC) key. The motion detect

setup menu appear on the monitor screen.

• Move the cursor to DISPLAY MODE.

Press the CAM (SET) key to see the present setting. The masks that

detect the brightness change start blinking.

• Move the cursor to LEVEL by using the joystick.

Use the joystick to obtain the optimum detection level. The “I” cursor

moves to the left or right.

Note: Repeat the above procedures until you obtain the desired

adjustment.

• Move the cursor to RECOVER TIME by using the joystick.

You can select the recover time for from the following values:

** SET UP **

CAMERA ID OFF *

ALC/MANUAL ALC *

SHUTTER OFF

AGC ON

SENS UP OFF

SYNC INT

WHITE BAL AWC *

WIDE D-RANGE OFF

MOTION DET ON *

AF MODE MANUAL *

RET SPECIAL *

** MOTION DETECT **

LEVEL ....I....

− +

DISPLAY MODE *

MASK SET *

RECOVER TIME 1 MIN

RET

Camera setting menu

• Move the cursor to RET and press the CAM (SET) key to return to SET

UP.

Motion detect menu

OFF

1MIN 2MIN 3MIN 5MIN

60MIN

30MIN 20MIN 10MIN

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

Comments to this Manuals

No comments

Panasonic WVCS600_SERIES User Manual Page 29

Comments to this Manuals

Related products and manuals for Camera accessories Panasonic WVCS600_SERIES