Panasonic WVCS600_SERIES User Manual download pdf (Page 19)

- 16 -

● To return to the PRESET NUMBER SET Menu

• Move the cursor to RET and press the CAM (SET) key. The PRESET

NUMBER SET menu appears with the * mark on the right of the preset

position number.

● To return to the setup menu

• Move the cursor to RET and press the CAM (SET) key.

■ Deleting Preset Positions

1. Move the cursor to PRESET 1* and select the position number to be

deleted by moving the joystick.

PRESET NO.15*H

POSITION SET *

PRESET ID ON *

ALC/MANUAL ALC *

WIDE D-RANGE OFF

DWELL TIME 2S

SCENE FILE 1 *

RET DEL

Preset setting menu

*** SET UP MENU ***

PRESET 1*

MAP*

HOME POSITION 15

SELF RETURN 10MIN

AUTO MODE OFF

LOCAL/REMOTE LOCAL

CAMERA *

Setup menu

* PRESET NUMBER SET *

1* 2* 3* 4*

5* 6* 7* 8*

9* 10* 11* 12*

13* 14* 15*H 16

17 18 19 20*

21 22 23 24

25 26 27 28

29 30 31 32

33-64 RET

PRESET NUMBER SET menu

2. Press the CAM (SET) key to display the preset setting menu.

3. Move the cursor to DEL and press the CAM (SET) key.

This deletes the preset position and the PRESET NUMBER SET menu

appears. The * mark on the right of the position disappears.

Note: The preset number you selected is valid only in SEQ and SORT

mode. Previously set parameters (for PAN, TILT positions, etc.)

are not changed. If you wish to change these parameters, you

must set them again.

■ Home Position Setting

1. To set a position number for the home position

Move the cursor to HOME POSITION and select the desired position

number by moving the joystick to the left or right.

2. Select OFF if you are not using the home position function.