Panasonic PT-CW330U Operations Manual download pdf (Page 44)

Options

- ENGLISH

Settings

Lamp Power Mode

Selects desired lamp power mode under

different situations.

Press ▲▼ to select [Lamp Power Mode].1 )

Press ► to display the setting dialog box.2 )

Press ◄► to select the desired item.3 )

Normal

Normal brightness.

ECO

Lower brightness reduces the lamp

power consumption and extends

the lamp life.

Note

When set to [ECO], you can extend the power savings,

reduced operating noise, the service life of the lamp.

When there is no signal for more than 5 minutes, the

lamp power will be decreased automatically for power

saving.

Clear Lamp Hours

Reset the lamp usage time after replacing the

lamp unit.

Press ▲▼ to select [Clear Lamp Hours].1 )

Press ► to display the setting dialog box.2 )

Press 3 )

▲▼

to switch [Yes]/[No].

Press ► to execute.4 )

Dynamic Black

Use this function to emphasizes detail of dark areas

of the image.

Press ▲▼ to select [Dynamic Black].1 )

Press ► to display the setting dialog box.2 )

Press ◄► to switch [On]/[Off].3 )

Emphasizes detail of dark areas of

the image.

Off

Displays with normal quality.

Note

[Dynamic Black] will be gray out and can not be operated

when [Picture mode] is set to other mode except [Movie].

High Altitude

Set to [On] when the projector is used at elevation

approx. 1 000 m (3 300 ft) and approx. 3 000 m

(10 000 ft).

Press ▲▼ to select [High Altitude].1 )

Press ► to display the adjustment 2 )

dialog box.

Press ◄► to switch [On]/[Off].3 )

For the elevation approx. 1 000 m

(3 300 ft) and approx. 3 000 m

(10 000 ft).

Off

For the elevation below approx.

1 000 m (3 300 ft).

Note

When [On] is selected, the speed and the noise of the

fan will increase.

Dust Filter Reminder

Set the cleaning cycle of the lters and reset the use

time of the lters.

Press ▲▼ to select [Dust Filter 1 )

Reminder].

Press ► to display the setting dialog box. 2 )

Filters Remind (Hour)

Set the timer to display the Dust Filter Reminder

message

(

page 55).

Press ▲▼ to select [Filter Remind].1 )

Press ► to display the adjustment 2 )

dialog box.

Press ◄► to set the time.3 )

The factory default is 0 hour.

You can set the time in 50 hours intervals and

the longest set time is 1000 hours.

Cleaning up Reminder

Reset the air lter used time to zero.

Reset the air lter hour counter after cleaning

or replacing the dust lter.

Press ▲▼ to select [Cleaning up 1 )

Reminder].

Press ► to display the setting dialog box.2 )

Press ▲▼ to switch [Yes]/[No].3 )

Press ► to execute.4 )

Note

It is recommended to clean the air lters regularly every

500 hours of usage.

Information

Displays the input signal source and setting state

information of the projector.

Press ▲▼ to select [Information].1 )

Press ► to display the information 2 )

dialog box.

Displays [Model Name], [Source], [Resolution],

[Software Version], [Color Space] and [Aspect

Ratio].

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 73 74

Comments to this Manuals

No comments

Panasonic PT-CW330U Operations Manual Page 44

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-CW330U