Panasonic PT-CW330U Operations Manual download pdf (Page 57)

Maintenance/replacement

ENGLISH -

Maintenance

Replacing the unit

Air lters

The air lter should be replaced when cleaning is ineffective.

A replacement air lter unit is available separately. (service component)

Contact your dealer for the optional air lters.

Also, please replace the air lters together when replacing the lamp unit.

Air lters (Part Number: Side H518PE28G001, Rear H518PE29G001) are included with the [ET-LAC300 /

ET-LAC200] replacement lamp unit.

Replacement of the air lters

Turn off the projector, and unplug the AC power cord from the AC outlet.1 )

Clean up the dust on the projector and around the air vents. 2 )

Slowly pull out the air lters from rear and side. 3 )

Install the new air lters (Replacement air lters). 4 )

To install the air lters, reverse the previous steps until you hear a "click" sound.

Reset the [Filter Reminder].5 )

Turn on the power and perform [Cleaning up Reminder] in the [Options] menu.

(

page 44)

Attention

Turn off the power before you replace the air lters.

When attaching the air lter unit, make sure that the projector is stable, and work in an environment that is safe, even in the

event of the air lter unit dropping.

Do not operate the projector with the air lter unit removed. Dust may accumulate on the optical elements degrading picture

quality.

Do not put anything into the air vents. Doing so may result in malfunction of the projector.

Air lter (side)

Air lter (rear)

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 73 74

No comments

Panasonic PT-CW330U Operations Manual Page 57