Panasonic PT-CW330U Operations Manual Page 61
- Page / 74
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Troubleshooting
ENGLISH -
61
Maintenance
Problem Cause
Reference
page
Partial, scrolling
or incorrectly
displayed image
For computer input, press the <AUTO ADJ.> button on the remote
z
control or the control panel.
—
If you are using a Windows PC:
z
1. Open the [My Computer] icon, then click the [Control Panel] folder.
2. Click the [Display] icon and select the [Settings] tab and set the
display resolution lower than or equal to UXGA (1600 × 1200).
If you are using a Notebook:
z
1. First, follow the steps above to adjust resolution of the computer.
2. Press the appropriate keys listed below for your notebook
manufacturer to send signal out from notebook to projector.
Panasonic
[Fn]+[F3] SAMSUNG
[Fn]+[F4]
Gateway
[Fn]+[F4] Acer
[Fn]+[F5]
SHARP
[Fn]+[F5] TOSHIBA
[Fn]+[F5]
IBM/Lenovo
[Fn]+[F7] LG
[Fn]+[F7]
SONY
[Fn]+[F7] EPSON
[Fn]+[F8]
Asus
[Fn]+[F8] FUJITSU
[Fn]+[F10]
NEC
[Fn]+[F3]/[F5] HP/Compaq
[Fn]+[F4]/[F5]
DELL
[Fn]+[F1]/[F8]
Apple
[F7]/[Command]+ [F2]
or
System Preference
Monitor
Resolution
If you experience difculty changing resolutions or your monitor freezes,
z
restart all equipment including the projector.
The screen of the
Notebook computer
is not displaying
your presentation
Some Notebook PCs may deactivate their own screens when a second
z
display device is in use. Each has a different way to be reactivated.
Refer to your computer’s manual for detailed information.
—
Image is unstable or
ickering
Adjust [Phase] in the [Position] menu.
z
38
Vertical lines can be
seen from the image
Adjust [Clock] in the [Position] menu.
z
Please change the output of the computer that is compatible with this
z
projector.
38
The image may
be stretched due
to different video
sources
When the video source is 16:9, adjust [16:9] in [Aspect Ratio] in the
z
[Position] menu.
When the video source is 4:3, adjust [4:3] in [Aspect Ratio] in the
z
[Position] menu.
If the image remains stretched after the previous settings, please adjust
z
the aspect ratio of the player.
38
Image is too small
or too large
Move the projector closer to or further from the screen.
z
21~23
Conrm [Aspect Ratio] in the [Position] menu.
z
38
Image is reversed
Conrm [Ceiling Mount] in the [Position] menu.
z
39
No 3D images
Is [3D] item in the 3D setting menu set to [Auto] or [On]?
z
Is [3D Format] set appropriately?
z
45
No 3D images during
3D viewing
Is the 3D glass out of battery? For chargeable 3D glass, please change
z
the glass. If the batteries run out, please change the batteries.
—
The projector stops
responding to all
controls
If possible, turn off the projector, then unplug the power cord and wait at
z
least 30 seconds before reconnecting power.
53
Lamp burns out or
makes a popping
sound
When the lamp reaches its end of life, it will burn out and may make a
z
loud popping sound. If this happens, the projector will not turn on until
the lamp module has been replaced.
—
- Operating Instructions 1
- PT-CW330E 1
- PT-CW240E 1
- PT-CX300E 1
- Read this rst! 2
- To remove the battery 7
- Maintenance 10
- Appendices 10
- Contents 10
- Precautions for Use 11
- Disposal 12
- Security 12
- Cautions on use 13
- Accessories 14
- Optional accessories 14
- About Your Projector 15
- - ENGLISH 16
- ENGLISH 17
- Using Remote control 19
- Setting up 20
- Connections 25
- Connecting example: Computers 26
- Powering ON/OFF 28
- ON(G)/STANDBY(R) indicator 29
- Powering On the Projector 30
- Powering Off the Projector 30
- Projecting 31
- Viewing 3D Images 32
- On-screen Display Menus 33
- Menu Tree 34
- Color Mode 36
- Wall color 36
- Brightness 36
- Contrast 36
- Position 38
- V Position 39
- Digital Zoom 39
- V Keystone 39
- Ceiling Mount 39
- Language 40
- Menu Location 40
- Closed Caption 40
- VGA Out (Standby) 40
- LAN (Standby) 40
- Test Pattern 41
- Remote ID 41
- Startup Logo 41
- In Standby Mode (Audio) 42
- Auto Source 43
- Auto Power Off (Min) 43
- Lamp Settings 43
- Dynamic Black 44
- High Altitude 44
- Dust Filter Reminder 44
- Information 44
- 3D Invert 45
- 3D Format 45
- 1080p@24 46
- Safety Precautions Message 46
- Safety Precautions 46
- Connect to Network 49
- Web Management 50
- About indicator status 54
- Maintenance/replacement 55
- Replacing the unit 57
- Troubleshooting 60
- Control commands 65
- Other terminals 66
- PJLink protocol 67
- List of compatible signals 68
- 3D compatible signals 69
- Specications 70
- Dimensions 72
- Panasonic Corporation 74
Related products and manuals for Data projectors Panasonic PT-CW330U
(12 pages)
(62 pages)© 2020, manymanuals.com. All rights reserved. | 0.377 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals