Panasonic PT-CW330U Operations Manual Page 54
- Page / 74
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
About indicator status
54
- ENGLISH
Maintenance
Maintenance
About indicator status
If an indicator turns on
If a problem should occur inside the projector, the <TEMP> and/or <LAMP> indicators will inform you. Manage
the indicated problems as follow.
Attention
Before you take a remedial measure, follow the procedure of switching the power off indicated in “Powering off the
z
projector”. (
Æ
page 30)
Conrm the status of the power indicated on the <ON(G)/STANDBY(R)> indicator. (
z
Æ
page 29)
<TEMP> indicator
J
Indicator
status
Status Check Remedy
Lights in
red
Temperature
too high
Is the air intake/exhaust
port blocked?
Remove any objects that are blocking the air intake/exhaust port.
Are the air lters
blocked?
See air lters cleaning or replacing. (
Æ
pages 55-57)
Is the room
temperature high?
Set up the projector in a location with an ambient temperature of
0°C (32°F) to 40°C (104°F)*.
Is the projector used
above the altitude of
1 000 m
(3 300 ft)
?
- Use the projector between the altitude approx. 1 000 m
(
3 300
ft) and approx. 3 000 m (10 000 ft) and set [High Altitude]
to [On]. (
Æ
page 44)
-
Do not use the projector at elevations approx. 3 000 m (10 000 ft).
Blinks in
red
The fan has
stopped
--
Disconnect the power plug from the power outlet and contact your
dealer.
* For the elevations below approx. 750 m (2 500 ft). When using the projector at the elevations between approx.
750 m (2 500 ft) and approx. 1 500 m (5 000 ft) sea level, temperature will be 0°C (32°F) to 35°C (95°F). When
using the projector at the elevations between approx. 1 500 m (5 000 ft) and approx. 3 000 m (10 000 ft) sea
level, temperature will be 0°C (32°F) to 30°C (86°F).
<LAMP> indicator
J
Indicator
status
Status Check Remedy
Lights in red
Lamp does not
light; or lights out
during projection
Does the projector be turned on
immediately after powering off?
Turn on the projector until the lamp has
completely cooled down.
Lamp unit failure; abnormal lamp
power; lamp broken
Disconnect the power plug from the power
outlet, and contact your dealer.
Note
When re-start the projector, turn off the projector, unplug the power cord, and then wait 30 seconds or more before
z
reconnecting power.
If the <TEMP> indicator lights or ashes or the <LAMP> indicator lights despite taking the actions above, plug out the AC
z
power cord, and contact your dealer for repair.
<TEMP> indicator
<LAMP> indicator
- Operating Instructions 1
- PT-CW330E 1
- PT-CW240E 1
- PT-CX300E 1
- Read this rst! 2
- To remove the battery 7
- Maintenance 10
- Appendices 10
- Contents 10
- Precautions for Use 11
- Disposal 12
- Security 12
- Cautions on use 13
- Accessories 14
- Optional accessories 14
- About Your Projector 15
- - ENGLISH 16
- ENGLISH 17
- Using Remote control 19
- Setting up 20
- Connections 25
- Connecting example: Computers 26
- Powering ON/OFF 28
- ON(G)/STANDBY(R) indicator 29
- Powering On the Projector 30
- Powering Off the Projector 30
- Projecting 31
- Viewing 3D Images 32
- On-screen Display Menus 33
- Menu Tree 34
- Color Mode 36
- Wall color 36
- Brightness 36
- Contrast 36
- Position 38
- V Position 39
- Digital Zoom 39
- V Keystone 39
- Ceiling Mount 39
- Language 40
- Menu Location 40
- Closed Caption 40
- VGA Out (Standby) 40
- LAN (Standby) 40
- Test Pattern 41
- Remote ID 41
- Startup Logo 41
- In Standby Mode (Audio) 42
- Auto Source 43
- Auto Power Off (Min) 43
- Lamp Settings 43
- Dynamic Black 44
- High Altitude 44
- Dust Filter Reminder 44
- Information 44
- 3D Invert 45
- 3D Format 45
- 1080p@24 46
- Safety Precautions Message 46
- Safety Precautions 46
- Connect to Network 49
- Web Management 50
- About indicator status 54
- Maintenance/replacement 55
- Replacing the unit 57
- Troubleshooting 60
- Control commands 65
- Other terminals 66
- PJLink protocol 67
- List of compatible signals 68
- 3D compatible signals 69
- Specications 70
- Dimensions 72
- Panasonic Corporation 74
Related products and manuals for Data projectors Panasonic PT-CW330U
(12 pages)
(62 pages)© 2020, manymanuals.com. All rights reserved. | 1.185 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals