Panasonic SC-RT50 User Manual download pdf (Page 30)

RQT8655

Copying from a video cassette recorder

e.g.: Connecting other video equipment to the IN2 or DV IN terminals

You can also connect to the IN1 input terminals on the rear.

pTurn off the unit and other video equipment before connecting.

If the audio output of the other equipment is monaural

Connect to L/MONO on the IN2 input terminals at the front.

* The S VIDEO terminal achieves a more vivid picture than the

VIDEO terminal.

See also the notes “Important notes for recording”(

➡

page 10)

Preparation

pTurn on the unit and connected equipment.

pPress [THEATER] to switch the remote control to operate this unit.

pPress [DRIVE SELECT] to select the DVD drive.

pInsert a disc (

➡

page 12).

pPress [REC MODE] to select the recording time.

pTo reduce noise in input from the video cassette recorder, set

“Line-in NR” to “On” (

➡

page 21).

pWhen recording from the unit’s DV IN terminal

Select the type of audio recording from “Select Audio Channel For

DV Input” in the Setup menu (

➡

page 39).

When recording from DV equipment (e.g., digital video camcorder),

you can record audio/video recordings from DV tape only.

[RAM] [-R] [-RW‹V›] [+R] [+RW]

[RAM] Programs are recorded as a title while at the same time

chapters are created at each break in the images and the playlist is

created automatically.

1 While stopped

Press [FUNCTIONS].

2 Press [, ] to select “Other

Functions” and press [ENTER].

3 Press [, ] to select “DV Camcorder

Rec.” and press [ENTER].

4 Press [, ] to select “Record” and

press [ENTER].

Recording starts.

When recording finishes

The confirmation screen appears. Press [ENTER] to finish DV

camcorder recording.

To stop recording

Press [w]. The confirmation screen appears. Press [ENTER].

[Note]

pOnly one piece of DV equipment (e.g., digital video camcorder) can

be connected to the unit via the DV IN terminal.

pIf you use video camcorders from other manufacturers these are

not guaranteed to work.

pIt is not possible to operate the unit from the connected DV

equipment.

pThe DV IN terminal on this unit is for use with DV equipment only.

(It cannot be connected to a computer, etc.)

pThe DV equipment name may not be shown correctly.

pDepending on the DV equipment, the images or audio may not be

input properly.

pThe date and time information on the tape in the DV equipment will

not be recorded.

pYou cannot record and play simultaneously.

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]

[Note]

When recording using this unit’s input terminals, only the sound

received at the time of recording will be recorded.

As long as the secondary audio that is recorded on the video

cassette is not output on the unit in play, it is not recorded.

1 While stopped

Press [INPUT] to select the input

channel for the equipment you have

connected.

e.g., If you have connected to IN2 input terminals, select “IN2”.

2 Start play on the other equipment.

3 When you want to start recording

Press [q REC].

Recording starts.

pUsing Flexible Recording (➜ page 13), you can record the content

of a video cassette (approx. 1–8 hours) to a 4.7 GB disc with the

best possible quality of recording without wasting disc space.

To skip unwanted parts

Press [] to pause recording. (Press again to restart recording.)

To stop recording

Press [w].

DV camcorder recording

(DV Camcorder Rec.)

When “DV camcorder connection” screen is displayed

, , , 

ENTER

CANCEL _

,



SUB MENU

RETURN

Numbered

buttons

■

REC

REC MODE

DRIVE

SELECT

FUNCTIONS

INPUT

DELETE

THEATER

Yellow White Red

S Video

cable*

Audio/video

cable

Comments to this Manuals

No comments

Panasonic SC-RT50 User Manual Page 30

Comments to this Manuals

Related products and manuals for Acoustics Panasonic SC-RT50