Panasonic SC-RT50 User Manual download pdf (Page 9)

RQT8655

Control with HDMI (HDAVI Control)

pIt is recommended that you use Panasonic’s HDMI cable.

Recommended part number: RP-CDHG15 (1.5 m/4.9 ft.), RP-

CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.) etc.

pNon-HDMI-compliant cables cannot be utilized.

1 Perform the following connections.

2 Set following items in the Setup menu

(

➡

page 39).

p“HDMI Video Output” : [On]

p“HDMI Audio Output” : [On]*

p“Ctrl with HDMI” : [On]

Turn on all HDAVI Controlcompatible equipment and select this

unit’s input channel on the connected television so that the

HDAVI Control function works properly. Also when the

connection or settings are changed, repeat this procedure.

* When “HDMI Audio Output” is set to “On”

pWhen audio is output with this unit’s speakers, audio quality may

be degraded a bit.

pWhen playing DVD-Audio with both Multi and 2 channel audio

tracks, audio will be output as two-channel output.

pIf connecting to equipment incompatible with CPPM (Content

Protection for Prerecorded Media

➡

page 49), copy-protected

DVD-Audio cannot be output through the HDMI terminal.

pEven if set to “On”, FM/AM broadcasts and audio from AUX

terminals, “F MUSICP”, or “R MUSICP” is not output through the

HDMI AV OUT terminals.

When the following operations are performed the television will

automatically switch the input channel and displays the

corresponding action. Audio output is also automatically switched to

this unit’s speakers.

- When play starts on the unit (

➡

page 16)

- When an action that uses the display screen is performed [e.g.,

Direct Navigator screen (

➡

page 16), scheduled recording screen

(

➡

page 14)]

You can select whether to output audio with this unit’s speakers or

the television speakers. Set this using the television settings. For

more information, please see the television operating instructions.

When audio is output with this unit’s speakers:

pThe sound of the television speakers will become mute.

pYou can control this unit’s volume using the television remote

control’s volume or mute button. The volume operation status is

displayed on the television.

When audio is output with the television speakers:

pThe sound of this unit becomes “0”.

pAudio output becomes 2-channel only. Multi-channel audio is

down-mixed (

➡

page 49).

[Note]

pThe display may be blank for several seconds if you switch the

speakers while viewing.

pIf you switch to this unit’s speakers while the unit is currently off, the

power to this unit will automatically turn on. See “Power on link”

below.

pIf the unit is turned off, speakers automatically switch to the TV.

The television automatically turns on and the corresponding display

appears when the following operations are performed with the

television in standby mode. Audio output is also automatically

switched to this unit’s speakers.

- When play starts on the unit (

➡

page 16)

- When an action that uses the display screen is performed [e.g.,

Direct Navigator screen (

➡

page 16), scheduled recording screen

(

➡

page 14)]

When the television is turned off, this unit is also automatically

turned off.

The unit automatically turns off even if the FUNCTIONS screen, the

status message or the on-screen menu is displayed, during

playback or when the unit is performing a scheduled recording.

[Note]

pEven if the television is turned off, the unit will not turn off at the

same time in the following conditions:

- When you pressed [q REC] and the unit is recording

- When copying

- When finalizing

- When select “FM”, “AM”, “F MUSICP.” or “R MUSICP.” as the

source.

For your reference

pWhen [



PLAY] is pressed on this unit for “Automatic input switching” or “Power on link”, the playback image is not immediately

displayed on the screen and it may not be possible to watch the contents from where playback starts.

In this case, press [



] or [



] to go back to where playback started.

What is HDAVI Control?

HDAVI Control is a convenient function that offers linked

operation of this unit and Panasonic TV (VIERA) under HDAVI

Control. You can use this function by connecting the equipment

with the HDMI cable. See the operating instructions for

connected equipment for operational details.

Television

AUDIO OUT

HDMI IN

Audio cable

(not included)

Red

White

Red

White

Back of the main unit

HDMI cable (not included)

HDMI AV OUT

AUX

Automatic input switching

Theater speaker

Power on link

Power off link

Inserting/Removing SD card / Disc and card handling / Unit care / Control with HDMI (HDAVI Control)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 51 52

Comments to this Manuals

No comments

Panasonic SC-RT50 User Manual Page 9

Comments to this Manuals

Related products and manuals for Acoustics Panasonic SC-RT50