Panasonic NVGS90 Operations Instructions download pdf (Page 44)

Others

LSQT1290

Playback (Sound)

1: Sound is not played back from the built-in

speaker of the movie camera.

• Is the volume too low? During playback, push

the [sVOLr] lever to display the volume

indication and adjust it. (

-31-)

2: Different sounds are reproduced at the

same time.

• Have you set [SETUP] >> [AUDIO OUT] >>

[STEREO] and reproduced a picture containing

the main sound and sub sound? Set to [L] to

hear main sound, and set to [R] to hear the sub

sound. (

-39-)

3: Sounds cannot be played back.

• Have you set [SETUP] >> [12bit AUDIO] >>

[ST2]? Set [12bit AUDIO] >> [ST1]. (

-39-)

Playback (Pictures)

1: Mosaic-pattern noise appears on images

during cue or review playback.

• This phenomenon is characteristic of digital

video systems. It is not a malfunction.

2: Horizontal stripes appear on images during

cue and review playback.

• Horizontal stripes may appear depending on

the scene, but this is not a malfunction.

3: Although the movie camera is correctly

connected to a TV, playback images cannot

be seen.

The images are vertical.

• Have you selected video input on the TV?

Please read the operating instructions of your

TV and select the channel that matches the

input terminals used for the connection.

• Is the [TV ASPECT] setting correct? Change

the setting to match the aspect ratio of the TV.

[SETUP] >> [TV ASPECT] >> [16:9] or [4:3].

4: Playback picture is not clear.

• Are the heads of the movie camera dirty? If the

heads are dirty, playback image cannot be

clear. Clean the heads by using the head

cleaner for digital video (optional). (

-45-)

• If the terminal for the AV cable is soiled, noises

may appear on the screen. Wipe the soil off the

terminal with a soft cloth, and then connect the

cable to the A/V terminal.

• Is a picture containing a copyright protection

signal (copy guard) being recorded? When a

protected picture is played back by the movie

camera, mosaic-like patterns appear on the

picture.

Others

1: The indication disappears, the screen is

frozen, or no operation can be performed.

• Turn off the power to the movie camera. If the

power cannot be turned off, press the [RESET]

button, or detach the battery or the AC adaptor

and then reattach it. After that, turn on the

power again. If normal operation is still not

restored, detach the power connected, and

consult the dealer who you purchased the

movie camera from.

2: “PUSH THE RESET SWITCH” is displayed.

• An irregularity in the movie camera has been

automatically detected. Remove the cassette

for data protection and then press the [RESET]

button with the boss A. The movie camera will

be activated.

• If you do not press the [RESET] button, the

power to the movie camera is turned off

automatically about 1 minute later.

• Even after you press the [RESET] button, the

indication may still appear repeatedly. If so, the

movie camera needs repair. Detach the power

connected, and consult the dealer who you

purchased the movie camera from. Do not

attempt to repair the appliance by yourself.

3: The warning/alarm indication [°] appears

when the camera is operated in the WEB

camera mode.

• Did you press the menu button or the recording

start/stop button? You cannot use the menu or

record onto the tape in the WEB camera mode.

• Did you attempt to play a tape without inserting

it? Insert a tape.

• Did you attempt to play a tape with copyright

protection (copy guard)? Pictures of the tape

with copyright protection (copy guard) cannot

be displayed on the PC. (The audio of the tape

can be played.)

RESET

LSQT1290_ENG.book 44 ページ２００８年３月４日　火曜日　午後２時２０分

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 199 200

Comments to this Manuals

No comments

Panasonic NVGS90 Operations Instructions Page 44

Comments to this Manuals

Related products and manuals for Camcorders Panasonic NVGS90