Panasonic PVGS500 Operations Instructions download pdf (Page 79)

Others

79

LSQT0975

5: The Camcorder malfunctions on editing,

dubbing from digital video equipment, or

using “MotionDV STUDIO 5.6E LE for DV”

or “Quick Movie Magic”.

• If a tape is recorded in multiple modes such as

SP and LP (recording mode), 12bit and 16bit

(sound recording mode), 4:3 and Wide,

recorded and unrecorded parts, the Camcorder

may malfunction at a point where the mode

switches. When you edit, do not record in

multiple modes.

6: The warning/alarm indication [°] appears

when the Camcorder is operated in the WEB

camera mode.

• Did you press the menu button or the recording

start/stop button? You cannot use the menu or

record onto the tape/card in the WEB camera

mode.

• Is the setting for the remote control correct?

• Did you attempt to play a tape without inserting

it? Insert a tape.

• Did you attempt to play a tape with copyright

protection (copy guard)? Pictures of the tape

with copyright protection (copy guard) cannot

be displayed on the PC. (The audio of the tape

can be played.)

• Is the USB driver installed?

Cautions for Use

ª About condensation

If you turn the Camcorder on when condensation

occurs on the head or the tape, condensation

indication [3] is displayed on the viewfinder or

the LCD monitor and the messages [3DEW

DETECT] or [3EJECT TAPE] (only when the

tape is inserted) appear. If so, follow the

procedure below.

1 Remove the tape if it is inserted.

≥It takes about 20 seconds to open the

cassette holder. This is not a malfunction.

2 Leave the Camcorder with the cassette

cover closed to cool or warm it to the

ambient temperature.

≥The status indicator blinks for about

1 minute and then the Camcorder

automatically turns off. Leave it for about

1.5 to 2 hours.

3 Turn the Camcorder on again, set it to the

Tape Recording/Playback Mode and then

check if the condensation indication

disappears.

Especially in cold areas, moisture may be frozen.

If so, it may take more time before the

condensation indication disappears.

Watch for condensation even before the

condensation indication is displayed.

≥If the indicator of the condensation does not

display on the LCD screen and/or EVF and you

notice condensation on the lens or the main

unit, do not open the cassette cover otherwise

condensation may be formed on the heads or

the cassette tape.

When the lens is fogged:

Set the [OFF/ON] switch to [OFF] and leave the

Camcorder in this condition for about 1 hour.

When the lens temperature becomes close to the

ambient temperature, the fogging disappears

naturally.

LSQT0975_ENG.book 79 ページ２００５年１２月１９日　月曜日　午前９時５１分

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 95 96

Comments to this Manuals

No comments