Panasonic KX-FLB811 User Manual download pdf (Page 30)

3. Fax

28

3FaxSending Faxes

3.1 Using the unit as a fax

machine

3.1.1 Entering the fax mode

Before sending a fax, set the operation mode to

the fax mode.

Press {FAX} to turn the {FAX} light ON.

Note:

L You can change the default operation mode

(feature #463 on page 60) and the timer

before returning to the default operation

mode (feature #464 on page 60).

L Received documents will be stacked on the

lower output tray. You can change the output

tray for faxing (Feature #441 on page 63)

(KX-FLB811 only).

3.2 Sending a fax manually

3.2.1 Using the auto document

feeder

L Confirm that there are no documents on

the scanner glass.

1 If the {FAX} light is OFF, turn it ON by

pressing {FAX}.

2 Adjust the width of the document guides (1)

to fit the actual size of the document.

3 Insert the document (up to 40 pages) FACE

UP into the feeder until a single beep is

heard.

L If the document guides are not adjusted

to fit the document, re-adjust them.

4 If necessary, change the following settings

according to the type of document.

L To select the resolution, see page 28.

L To select the contrast, see page 28.

5 Press {MONITOR}.

6 Dial the fax number.

7 Press {START}.

Note:

L Any document which can be sent as a fax can

also be copied and scanned (page 30).

L Do not open the document cover when

sending a fax with the auto document feeder.

To stop sending

Press {STOP}.

To select the resolution

1. Press {RESOLUTION}.

2. Press {V} or {^} repeatedly to select the

desired resolution.

– “STANDARD”: For printed or typewritten

documents with normal-sized characters.

– “FINE”: For documents with small print.

– “SUPER FINE”: For documents with very

small print. This setting is effective only

when the other party has a compatible fax

machines.

– “PHOTO”: For documents containing

photographs, shaded drawings, etc.

L Using the “FINE”, “SUPER FINE” and

“PHOTO” settings will increase transmission

time.

L If the resolution setting is changed during

feeding, it will be effective from the next page.

To select the contrast

You can adjust this setting depending on the

darkness or lightness of the document. 5 levels

(light to dark) are available.

1. Press {CONTRAST}.

2. Press {V} or {^} repeatedly to select the

desired contrast.

{FAX}

{FAX}

{STOP}

{START}

{SET}{V}{^}

{REDIAL}

{MONITOR}

{CONTRAST}

{RESOLUTION}

{QUICK SCAN}

1

FLB811-PFQX2307ZB-en.book Page 28 Thursday, February 16, 2006 3:57 PM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 105 106

Comments to this Manuals

No comments