Panasonic KX-FLB811 User Manual download pdf (Page 53)

7. Multi-Function Station software

51

For details about the [Print] dialog box,

click [?], then click the desired item.

Note:

L For Microsoft PowerPoint

®

, select

[Color] or remove the check next to

[Grayscale] in the print dialog so that

colored text will be printed in grayscale.

3 Select [Panasonic KX-FLB811]/

[Panasonic KX-FLB801] as the active

printer.

L If you have changed the name of the unit

when installing, select that name from the

list.

L To change the printer settings, proceed

as follows.

For Windows 98/Windows Me:

Click [Properties], then click the desired

tab. Change the printer settings, then

click [OK].

For Windows 2000:

Click the desired tab and change the

printer settings.

For Windows XP:

Click [Preferences], then click the

desired tab. Change the printer settings,

then click [OK].

4 Click [Print] or [OK].

L The unit will start printing.

Note:

L To load paper, see page 18, 19.

L When using the manual input tray, load the

recording paper after step 4.

L For details about the paper specifications,

see page 51, 91.

Setting the printer properties

You can change the printer setting in step 3. We

recommend that you test paper (especially

special sizes and types of paper) on the unit

before purchasing large quantities.

You can change the settings on following tabs.

Paper: Paper size, paper type, etc.

Output: Pages per sheet, output tray (KX-

FLB811 only), etc.

Quality: Graphics mode, resolution, toner save

feature, etc.

Note:

L To s e le c t [Envelope] for paper type on the

[Paper] tab, you need to select [Envelope

#10] or [Envelope DL] for paper size.

L You can select the output tray for each

printing on the [Output] tab. To change the

default output tray, see page 56 (KX-FLB811

only).

L When printing from a computer, the toner

save feature on the [Quality] tab overrides

the unit’s toner save setting (feature #482 on

page 60).

7.4.2 Transparencies

Use transparencies designed for laser printing.

We recommend the following:

3M

®

CG3300/CG5000

L Use the manual input tray to print

transparencies.

L Load transparency sheets one page at a

time for printing, print-side down.

L Printed transparency will be stacked on

the upper output tray (KX-FLB811 only).

L Remove each transparency after printing

and place it on a flat surface to cool and to

prevent it from curling.

L Do not re-use transparencies that have

already been fed through the unit. This

includes transparencies that have been fed

through and ejected without being printed on.

L Some types of transparencies have

instructions recommending which side to

print on. If the print quality is poor, try printing

on the other side.

7.4.3 Labels

Use labels designed for laser printing. We

recommend the following:

Avery

®

5160/5161/5162/5163/5164/5165/5167/5168

XEROX

®

LWH100/LWH110/LWH120/LWH130/LWH140

L Use the manual input tray to print labels.

L Load label sheets one page at a time for

printing, print-side down.

L Printed label will be stacked on the upper

output tray (KX-FLB811 only).

L Remove each label after printing.

L Do not use the following types of labels:

FLB811-PFQX2307ZB-en.book Page 51 Thursday, February 16, 2006 3:57 PM

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 105 106

Comments to this Manuals

No comments