Panasonic WV-SW458 Installation Guide download pdf (Page 10)

10

Precautions

Refer installation work to the dealer.

Installation work requires technique and experi-

ences. Failure to observe this may cause fire,

electric shock, injury, or damage to this prod-

uct.

Be sure to consult the dealer.

Stop the operation immediately when

something is wrong with this product.

When smoke goes up from the product, the

smell of smoke comes from the product, or the

exterior of the product has deteriorated, contin-

ued use will cause a fire or fall of the product

resulting in injury, accidents, or damage to the

product.

Turn the power off immediately and contact

qualified service personnel for service.

Do not attempt to disassemble or modify

this product.

Failure to observe this may cause fire or electric

shock.

Consult the dealer for the repair or inspections.

Do not insert any foreign objects.

Fire or electrical shock may be caused if water

or any foreign objects, such as metal objects,

enter inside the unit.

Turn the power off immediately and contact

qualified service personnel for service.

Select an installation area that can sup-

port the total weight.

Selecting an inappropriate installation surface

may cause this product to fall down or topple

over, resulting in injury.

Installation work shall be started after sufficient

reinforcement.

Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause a

fall of the product resulting in injury or acci-

dents.

Consult the dealer for the inspections.

Do not use this product in an inflammable

atmosphere.

Failure to observe this may cause an explosion

resulting in injury.

Avoid installing this product in the loca-

tions where salt damage occurs or corro-

sive gas is produced.

Otherwise, the mounting portions will deterio-

rate and accidents such as a fall of the product

may occur.

The exclusively designed mount bracket

shall be used.

Failure to observe this may cause a drop result-

ing in injury or accidents.

Use the exclusively designed mount bracket for

installation.

The screws and bolts must be tightened to

the specified torque.

Failure to observe this may cause a drop result-

ing in injury or accidents.

Install this product in a location high

enough to avoid people and objects from

bumping the product.

Failure to observe this may cause a drop result-

ing in injury or accidents.

Turn the power off when wiring this prod-

uct.

Failure to observe this may cause electric

shock. In addition, short circuit or wrong wiring

may cause fire.

Do not strike or give a strong shock to this

product.

Failure to observe this may cause fire or injury.

Shock resistance grade (50J (IEC60068-2-75)/

IK10 (IEC 62262) or equivalent) is applied to

this product only when it is installed correctly

as described in these operating instructions

and appropriate shock resistance treatment is

applied.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments