Panasonic WV-SW458 Installation Guide download pdf (Page 21)

x Determine the direction of the mount bracket according to the installation environment (how the

cables are wired, etc.) before mounting it to a ceiling or a wall by fixing 4 screws (locally pro-

cured).

The direction of the camera in relation to the mount bracket is the 4 directions as shown in the

illustration.

IMPORTANT:

• For mounting a camera on a concrete surface, use an

anchor bolt (M4) or an AY plug bolt (M4) for installing.

(Recommended tightening torque M4: 1.6 N·m {1.18 lbf·ft})

Note:

• Thecamera'sdirectionisdeterminedbythedirectionof

the camera attachment (accessory) mounted to the

mount bracket c.

Open the camera access hole on the ceiling or wall as shown in the illustration. Align the cable hole

of the mount bracket (accessory) to the hole, and mount the bracket to hole A or hole B on the

ceiling or wall.

[For use of the hole A]

ø27 mm

{ø1-1/16 inches}

51 mm {2 inches}51 mm {2 inches}

Cable access hol

eCable access hole

Center of mount bracket

Mount bracket

(accessory)

Fixing screws

(4 pcs., locally procured)

Cable hole

ø27 mm

{ø1-1/16 inches}

Female thread for the conduit

Cable hole

The direction

of the camera

(4 directions)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

No comments

Panasonic WV-SW458 Installation Guide Page 21