Panasonic WV-SW458 Installation Guide download pdf (Page 24)

IMPORTANT:

 • WheninsertinganSDmemorycard,makesurethedirection.

 • Before removing the SD memory card, select “Not use” for “SD memory card” on the

[SD memory card] tab of the “Basic” page first. Turn off the power after “Not use” selection,

and then unload the SD memory card. When the SD memory card is inserted or removed with

the power on, data in the SD memory card may be damaged. (

☞ Operating Instructions

(included in the CD-ROM))

z Loosen the SD memory card slot cover fixing screw

using the bit for tamperproof screw (accessory), then

open the SD memory card slot cover.

x Insert an SD memory

card fully into the SD memory card

slot until a

click is heard.

c Close the SD memory card slot cover, and tighten the SD

memory card slot fixing screw to secure the cover.

(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})

IMPORTANT:

•EnsurethattheSDmemorycardslotcover'sfixing

screw is firmly secured.

Failure to observe this may cause water leakage or

malfunction.

v When removing the SD memory card, push in

the SD memory card until a click is heard after

executing step 1, then pull it out from the SD

memory card slot. After removing the SD mem-

ory card, close the SD memory card slot cover,

and tighten the SD memory card slot cover fix-

ing screw to secure the cover.

(Recommended tightening torque: 0.78 N·m {0.58 lbf·ft})

Insert/remove an SD memory card

SD memory card slot cover fixing screw

SD memory card slot cover

SD memory card slot

Label face upward

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

No comments

Panasonic WV-SW458 Installation Guide Page 24