Panasonic WV-SW458 Installation Guide download pdf (Page 36)

Before asking for repairs, check the symptoms with the following table.

Contact your dealer if a problem cannot be solved even after checking and trying the solution in the

table or a problem is not described below.

Symptom Cause/solution

Reference

pages

Power is not turned on.

When using DC power supply

 • Is12VDCpowersupplyconnectedtothe2P

power supply cable?

→ Check whether the connection is appro-

priately established.

 • Is the AC adaptor in use compliant with the

Specifications?

→ Check the Specifications regarding AC

adaptor.

When using a PoE device for power supply

 • ArethePoEdeviceandthenetworkcableof

the camera connected using a LAN cable?

→ Check whether the connection is appro-

priately established.

 • DependingonthePoEdevice,thepowersup-

ply will stop when the demanded power

exceeds its total power limit for all PoE ports.

→ Refer to the operating instructions of the

PoE device in use.

Troubleshooting

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Panasonic WV-SW458 Installation Guide Page 36