2. Camera Identification Setting (CAMERA ID)
• Move the cursor to CAMERA ID, and select ON (to display the camera
identification) or OFF by using the joystick.
• Follow the steps below to edit the camera ID characters:
1. Move the cursor to CAMERA ID and press the CAM (SET) key to
display the character editing menu. The character cursor on the
letter “0” and the editing cursor on the left of the editing area start
blinking.
2. Move the character cursor to the character you want to change
by using the joystick, and press the CAM (SET) key. The
selected character appears in the editing area. (The blinking
editing cursor moves to the right automatically at this moment.)
3. Repeat the steps above until all characters are edited.
• After editing the camera identification characters, follow the steps
below to set the position of the CAMERA ID on the monitor screen.
1. Move the cursor to POSI, and press the CAM (SET) key to display
the ID position menu. The CAMERA ID starts blinking and the ID
position menu appears in the display.
2. Use the joystick to decide the position of the CAMERA ID on the
monitor screen. Press the MON (ESC) key to fix the position, and
return to the character editing menu.
Notes:
1. When you want the editing cursor to move to a specific character
in the editing area, move the character cursor to “
←” or “→”, and
press the CAM (SET) key. This function helps you to edit or
correct a specific character.
2. When you want a blank space in the CAMERA ID, move the
character cursor to SPACE, and press the CAM (SET) key.
3. When you want to erase all characters in the editing area, move
the cursor to RESET and press the CAM (SET) key.
4. The positioning of the CAMERA ID stops at the edges of the
screen.
5. The CAMERA ID moves faster when the joystick is kept pressed
for more than 0.5 seconds.
6. To return to SET UP for setting other items, move the cursor to
RET, and press the CAM (SET) key.
Comments to this Manuals