Panasonic PT-DS8500U Operations Instructions Page 54
- Page / 129
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
PICTURE menu
54
- ENGLISH
Settings
COLOR TEMPERATURE
You can adjust the white balance of the projected
image.
Press ▲▼ to select [COLOR 1 )
TEMPERATURE].
Press ◄► or <ENTER> button.2 )
The [COLOR TEMPERATURE] individual
z
adjustment screen will be displayed.
Press ◄► to switch [COLOR 3 )
TEMPERATURE].
The setting will change as follows each time
z
◄► is pressed.
DEFAULT
Û
USER1 USER2
9300K 3200K
[DEFAULT] cannot be selected when the :
Û
[PICTRUE MODE] has been set to [USER] or
[DICOM SIM.].
Note
When any setting other than [OFF] has been selected
z
for [COLOR MATCHING] (
Æ
page 68), the [COLOR
TEMPERATURE] setting is xed to [USER1].
The value of color temperature is for reference only.
z
J
To further adjust toward the
desired white balance
Select [USER1] or [USER2] in Step 3).4 )
Press <ENTER> button.5 )
The [COLOR TEMPERATURE] screen will be
z
displayed.
Press ▲▼ to select [WHITE 6 )
BALANCE].
Press <ENTER> button.7 )
The [WHITE BALANCE] screen will be
z
displayed.
Press ▲▼ to select [WHITE 8 )
BALANCE HIGH] or [WHITE
BALANCE LOW].
Press <ENTER> button.9 )
The [WHITE BALANCE HIGH (or LOW)]
z
screen will be displayed.
Press ▲▼ to select [RED], [GREEN] 10 )
or [BLUE].
Press ◄► to adjust the level.11 )
Item Operation Adjustment
Adjustment
range
RED
Press ►. Deepens red.
Maximum
value
HIGH : 255
LOW : 127
Minimum
value
HIGH : 0
LOW :
-
127
Default
HIGH : 255
LOW : 0
Press ◄. Weakens red.
GREEN
Press ►. Deepens green.
Press ◄. Weakens green.
BLUE
Press ►. Deepens blue.
Press ◄. Weakens blue.
Note
All colors will not be displayed properly unless adequate
z
adjustment is made. If the adjustment does not look
suitable, you can press <DEFAULT> button to return the
setting for the selected item only to the factory default
setting.
The [COLOR TEMPERATURE] cannot be adjusted
z
for the internal test pattern (
Æ
page 88). Be sure to
project the input signal when adjusting the [COLOR
TEMPERATURE].
Changing the name of [USER 1]
J
or [USER 2]
Select [USER1] or [USER2] in step 3).1.
Press <ENTER> button.2.
The [COLOR TEMPERATURE] screen will be
z
displayed.
Press ▲▼ to select [COLOR 3.
TEMPERATURE NAME CHANGE].
Press <ENTER> button.4.
The [COLOR TEMPERATURE NAME
z
CHANGE] screen will be displayed.
(in units of 100K)
COLOR TEMPERATURE NAME CHANGE
- Operating Instructions 1
- PT-DZ8700U 1
- PT-DS8500U 1
- PT-DW8300U 1
- Important Safety Notice 2
- Heightened luminance 4
- Lengthened lamp 4
- Reduced standby power 4
- Contents 5
- Maintenance 7
- Appendix 7
- - ENGLISH 10
- Cautions when transporting 11
- Cautions when installing 12
- ENGLISH 13
- Security 14
- Cautions on use 14
- Cleaning and maintenance 15
- Disposal 15
- Accessories 16
- About Your Projector 17
- Projector body 18
- Setting projector ID number 20
- Using a wired remote control 20
- Setting up 21
- Connections 34
- How to remove the projection 37
- Powering ON/OFF 38
- Powering up the projector 39
- Making adjustment and 39
- Powering off the projector 40
- Direct power off function 40
- Projecting 41
- Using the SHUTTER function 46
- On-screen display function 46
- Switching the input signal 46
- STATUS function 46
- Automatic adjustment 47
- Using the FUNCTION button 47
- Displaying the internal 47
- Changing the picture aspect 48
- Menu Navigation 49
- MAIN MENU 50
- SUB MENU 50
- PICTURE menu 52
- CONTRAST 53
- BRIGHTNESS 53
- COLOR TEMPERATURE 54
- SYSTEM DAYLIGHT VIEW 55
- SHARPNESS 56
- NOISE REDUCTION 56
- DYNAMIC IRIS 56
- (PT-DZ8700U/PT-DS8500U only) 57
- POSITION menu 58
- (PT-DZ8700/PT-DS8500 only) 60
- (PT-DW8300 only) 62
- ADVANCED MENU 63
- INPUT RESOLUTION 64
- CLAMP POSITION 64
- EDGE BLENDING 64
- FRAME DELAY 66
- RASTER POSITION 66
- DISPLAY LANGUAGE menu 67
- DISPLAY OPTION menu 68
- (PT-DZ8700 only) 70
- AUTO SIGNAL 71
- AUTO SETUP 71
- (Only RGB input) 72
- BACK COLOR 74
- STARTUP LOGO 74
- PROJECTOR SETUP menu 75
- COOLING CONDITION 76
- LAMP SELECT 76
- LAMP RELAY 76
- LAMP POWER 77
- BRIGHTNESS CONTROL 77
- STANDBY MODE 81
- SCHEDULE 81
- NO SIGNAL SHUT-OFF 84
- REMOTE2 MODE 84
- FUNCTION BUTTON 84
- DATE AND TIME 84
- LENS CALIBRATION 85
- FILTER COUNTER RESET 85
- LOAD ALL USER DATA 86
- INITIALIZE 86
- SERVICE PASSWORD 86
- SAVE ALL USER DATA 86
- P IN P menu 87
- TEST PATTERN menu 88
- SIGNAL LIST menu 89
- Managing the sub memory 90
- SECURITY menu 91
- DISPLAY SETTING 92
- TEXT CHANGE 92
- MENU LOCK 92
- MENU LOCK PASSWORD 92
- CONTROL DEVICE SETUP 93
- Network connections 95
- NETWORK menu 100
- Monitor Lamp indicators 107
- Replacement 109
- Troubleshooting 112
- Technical Information 114
- Control commands via LAN 115
- Serial terminal 117
- REMOTE 2 IN terminal 120
- List of compatible signals 122
- Specications 124
- Dimensions 126
- About brand 126
- Attachment procedure 127
- ヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ 129
Related products and manuals for Data projectors Panasonic PT-DS8500U
(74 pages)
(62 pages)© 2020, manymanuals.com. All rights reserved. | 0.132 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals