Panasonic PT-DS8500U Operations Instructions download pdf (Page 82)

PROJECTOR SETUP menu

- ENGLISH

Settings

Press ▲▼ to select [TIME] or 4 )

[COMMAND] and change the setting

according to the instructions of the

menu.

TIME

Set the time at which the command

will be executed using ▲▼ or numeral

buttons.

COMMAND

Select a command to execute at the

set time from the following.

POWER ON

•

STANDBY

•

SHUTTER

•

OPEN

SHUTTER

•

INPUT RGB1

•

INPUT RGB2

•

INPUT VIDEO

•

INPUT S-VIDEO

•

INPUT DVI-D

•

INPUT HDMI

•

INPUT SDI

•

LAMP POWER

•

HIGH

LAMP POWER

•

LOW

LAMP DUAL

•

LAMP SINGLE

•

P IN P OFF

•

P IN P USER1

•

P IN P USER2

•

P IN P USER3

•

PT-DZ8700U/PT-DS8500U only:

Press ▲▼ to select [STORE] and 5 )

press <ENTER> button.

Note

If you try to register a setting that would cause the

lamp to ash for a short time, an error message will be

displayed on the screen. Set the [TIME] and [COMMAND]

again.

To delete a command which has been set, press

<DEFAULT> button.

If multiple commands have been set for the same time,

they are executed in chronological order starting from the

smallest command number.

The setting time operates under the local time.

(

page 84)

If an operation is executed with the remote control or

control panel of the projector or with a control command

before the command set in the schedule is executed, the

command set with this function may not be executed.

RS-232C

This sets the communication parameters at the serial

terminals.

Press ▲▼ to select [RS-232C].1 )

Press <ENTER> button.2 )

The [

RS-232C] screen will be displayed.

Press ▲▼ to select communication 3 )

conditions.

press ◄► to change the setting.4 )

Note

Refer to “Serial terminal” (

page 117).

Selecting items in [EMULATE]

When using the control commands for one of our

projectors that you have previously purchased to

control this projector using a computer via its serial

input terminal, set up the EMULATE function as

follows. This will allow you to use the control software

etc. designed for our existing projectors.

Select [EMULATE] in step 3).1.

Press <ENTER> button.2.

Press ▲▼ to select the required item.3.

Press <ENTER> button.4.

● DEFAULT

DZ8700 Series, DS8500 Series,

DW8300 Series, D5000 Series,

D6000 Series, DW6300 Series,

DZ6700 Series, DZ6710 Series

D9610

SERIES

D9510 Series, D9610 Series,

D9500 Series, D9600 Series,

D8500 Series, D8600 Series

D7700

SERIES

D7500 Series, D7600 Series,

D7700 Series, DW7000 Series

L6500

SERIES

L6500 Series, L6510 Series,

L6600 Series

About [EMULATE SETTING]

This sets which input signal can be selected using the

input signal change command when a projector of a

specic model is used with the emulate function.

Select [EMULATE SETTING] in step 3).1.

Press <ENTER> button.2.

The [EMULATE SETTING] screen will be

displayed.

When the D9610 Series is selected

Press ▲▼ to select input signal 1.

[VIDEO], [S-VIDEO], [RGB1], [DVI-D] or

[SDI].

[RGB2] and [HDMI] cannot be selected.

[SDI] is not shown for PT-DW8300U.

Press ◄► to select the input signal 2.

change command to be assigned to

the selected input signal.

Selectable input signal change commands

When RGB1 is selected:

[INPUT1], [INPUT2], [INPUT3], [INPUT

RGB], [NONE]

For all other instances:

[INPUT1], [INPUT2], [INPUT3], [NONE]

The same input signal change command

cannot be assigned to multiple input signals.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 128 129

Comments to this Manuals

No comments

Panasonic PT-DS8500U Operations Instructions Page 82

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-DS8500U