Panasonic PT-DS8500U Operations Instructions download pdf (Page 59)

POSITION menu

ENGLISH -

Settings

VID AUTO (PRI.)

The projector identies the abovementioned

VID or S1 signals and displays the picture by

automatically choosing the screen sizes of 4 : 3

or 16 : 9 according to the VID if it is detected or

S1 signals if a VID is not detected. This function is

effective for S-Video NTSC signals.

THROUGH

Pictures are displayed without changing the

resolution of the input signals.

16 : 9

When standard signals

are input, the pictures

are displayed with the aspect ratio converted to

16 : 9. When wide signals are input

, the pictures

are displayed without changing the aspect ratio.

4 : 3

When standard signals

are input, the pictures

are displayed without changing the aspect ratio.

When wide signals are input

and [4:3] is

selected with [SCREEN FORMAT], the aspect

ratio is changed to 4:3. If [4:3] is not selected with

[SCREEN FORMAT], the pictures are reduced so

that they will be in the 4:3 screen without changing

the input aspect ratio.

H FIT

The display will use the full width of the screen

range selected with [SCREEN FORMAT]. When

signals have a vertical aspect ratio that is larger

than the screen aspect selected with [SCREEN

FORMAT], the pictures will be displayed with their

bottom areas cut off.

V FIT

The display will use the full height of the screen

range selected with [SCREEN FORMAT].

HV FIT

The pictures are displayed in the full screen range

selected with [SCREEN FORMAT]. If the aspect

ratios of the input signals and screen range differ,

conversion to the screen aspect set with [SCREEN

FORMAT] is performed and then the pictures are

displayed.

Standard signals are input signals with an aspect *4 :

ratio of 4 : 3 or 5 : 4.

Wide-screen signals are input signals with an *5 :

aspect ratio of 16:10, 16 : 9, 15 : 9 or 15 : 10.

Note

Some size modes are not available for certain types of

input signals. For NTSC signals, [DEFAULT] cannot be

selected.

If an aspect ratio which is different from the aspect ratio

for the input signals is selected, the pictures will appear

differently from the originals. Be careful of this when

selecting the aspect ratio.

If using this projector in places such as cafes or hotels to

display programs for a commercial purpose or for public

presentation, note that adjusting the aspect ratio or using

the zoom function to change the screen pictures may

be an infringement of the rights of the original copyright

owner for that program under copyright protection laws.

If conventional (normal) 4 : 3 pictures which are not

wide-screen pictures are displayed on a wide screen,

the edges of the pictures may not be visible or they may

become distorted. Such pictures should be viewed as

with an aspect ratio of 4 : 3 in the original format intended

by the creator of the pictures.

ZOOM

This adjusts the size of the projected pictures.

Press ▲▼ to select [ZOOM].1 )

Press <ENTER> button.2 )

The [ZOOM] screen will be displayed.

Press ▲▼ to select [VERTICAL]/ 3 )

[HORIZONTAL], and press ◄► to

adjust.

When [ASPECT] is set to

[DEFAULT]

Press ▲▼ to select [MODE].1 )

Press ◄► to switch [MODE].2 )

INTERNAL

Zoom area is the factory default

setting of [SCREEN FORMAT] in

[SCREEN SETTING].

FULL

Enlarges the size of the pictures

using the whole of the display area

selected with [SCREEN FORMAT].

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 128 129

Comments to this Manuals

No comments

Panasonic PT-DS8500U Operations Instructions Page 59

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-DS8500U